Forum Replies Created
-
Posts
-
Re: Beko Sealed Tanks?
Martin wrote:
kwatt wrote:
Not good if correct.The days of bearing changes being confined to history becomes ever closer.
good. When it comes to plastic tubs. has anyone ever made a profit on bearing changes on a split plastic tub, doubt it.
Re: Smeg DWF410SS – Drain pump cycle cuts out throughout was
would go for the solonoid as if its open circuit there is defo a problem which will effect the pcb. If however the dispenser flap opens as soon as you switch on then, as you suggested, the pcb will also be shot. A good tip is to pick up a basic washing machine solonoid valve (as its a lot cheaper than a new dispenser) and connect that up in place of the dipsneser coil, this will then prove if it is the problem or not and if so then go for the dispenser itself.
Re: ISE dishwasher
BigBadDad wrote:Thanks for those replies. Tried e-mailing Mark but it bounced – I’ll be in touch the week of the 3rd to arrange a visit.
I am back now if you want to try again, just checked the above address and no problems there.
Re: WFL 2066 GB/01 Suspension Leg Change
has to be drilled out, not as daunting as it sounds and can be done with drum in place, but it it as odd size drill that you may not have in your tool kit, cannot remember what but I think 13.5mm, dont hold me to that. Order the spare kit and it should say on the instructions supplied.448032
Re: ISE dishwasher
Hi, yes we do have one in our showroom near to Stansted Airport….bad news though is its not great timing as I am away on hols (first one for several years I should add!) from tommorow (wed) until the 31st of August. It is a visit by appointment though and if you can hang on until I am back I would be happy to arrange this. You can gladly bring along some plates (clean ones!) to try but it is not connected so there will be no opportunity to hear it running. If you are still interested in seeing it then email me at: mark@angliaelectrics.co.uk and I will arrange as soon as I am able to do so.
Re: Bosch dishwasher help!
has a sealed base so unusual to leave water on the floor unless its a blocked pump and way overfilled in which case most of the electrical parts will be underwater. Some models you can clear the drain pump from inside after removing the filter while some others is a pump off job.
Re: smeg UK2010X-1
818730545 retail from smeg is only £55.00. as its a pyro oven I would suggest fitting the correct part.
Re: Electrolux bs68/01 oven
look at a picture of the thermostat and it seems to be the type with a built in switch so maybe its a mod?
Re: Football Season 2012/13
Welcome to the bottom of the League Jimbo! nice to have company down here.
Re: Card Payment facility incl terminal
Just so you know, I have used mobile terminals for several years from several different providers and constantly suffer all the above problems, ie no or broken connections, the odd update sometimes helps but soon slip back into problems, really anoying after a quick job which takes longer to get paid than the job itself took.
As someone else pointed out, shut down the machine after each transaction unless you are taking lots of transactions from the same place. Its a pain to re boot everytime (and they take ages to “install modem”, etc makes me wonder why the modem cannot be constantly “installed” but I guess there is some techno reason for it.)
Despite claims of “multi sim” they alway have a preffered network and someone told me that it needs to connect to that network first just to see how poor the signal is before trying elsewhere, go figure that one out!
You can manually connect to a certain network but its a pain and suddenly cheques seem like a great idea.
Its not all bad, on most occasions it will connect quickly and efficently. Seems though if there is a dodgy signal on the first job of the day then thats it, it will be a pain all day long.
Cannot live without them thoughRe: bosch d/w sgs45c02gb/06
Galway wrote:💡 i will just buy 30 reed switches instead : 😆
thanks
must be some exchange rate as they are about £9 in english ££££!Re: bosch d/w sgs45c02gb/06
Galway wrote:it was indeed the flowmeter.but i just replaced the micro reed switch on it .only about 2euro instead of having to buy new flow meter at about 30 euro.
Thanks 😀Next time call me, ill do you complete flowmeter for 29 euro’s 😉
