[electrofix]

Re: BEKO DCU8230 not heating up

door ntc is rated 12000 ohms at 25 degrees C
heater ntc is 19500 same temp

always select a timed programme for tests without wet clothes inside as some machines wont heat unless damp is detected

if this fails remove and check main pcb for damage

dave

[electrofix]

Re: BEKO DCU8230 not heating up

there is also another NTC at the front that measures the air in the filter area

dave

[electrofix]

Re: LG F1681TD Water Heater causing RCD to trip

yes probably if it has a temp setting set it to cold

dave

[electrofix]

Re: LG F1681TD Water Heater causing RCD to trip

the rcd is tripping because the resistance to earth is to low and has no bearing on the element resistance of 30 ohms

had a few of them where the heater bracket has rubbed through the metal casing. check for damage on the element. if non is found its still likely a new element will cure it

Dave

[electrofix]

Re: Ariston AFA250 fault

if its QER they are ok if its not would not trust them

dave

[electrofix]

Re: Fisher & paykel dd603i not pumping

its only a small pipe into the pump and it can get blocked. remove rotor and check its clear

dave

[electrofix]

Re: DIGITAL SERVICE COVER LTD

never heard of them and i work all over liverpool

Dave

[electrofix]

Re: Bosch SMS 58E32GB/73 Error code E31

symptoms

no access to bosch error codes myself

Dave

[electrofix]

Re: John Lewis t/d JLTDH14 916096803/00

that comes up as coductimetric sensor fault

Faulty wiring; Brushes worn/faulty; Main circuit fault

Dave

[electrofix]

Re: John Lewis JLTDC01 – 91609605600

hi steve

if you look in your pm inbox I sent you some tech info sep 29th but you have not downloaded it yet

dave

[electrofix]

Re: Siemens HB86E560B combi oven clock display dead

not had one yet to try and diagnose but look for blown caps first as the one thing chips don’t like is ripple on the supply lines

Dave

[electrofix]

Re: Bosch SMS 58E32GB/73 Error code E31

there are a few things it can be
1 blown element
2 timer

on your model the heater is part of the motor so its a complete unit at £111 + from bosch

unfortunately they are not as strong as the old style bosch heaters

spare part listings here http://www.bosch-home.co.uk/store/spareparts/search

Dave

[electrofix]

Re: Hotpoint 1848 Spares

first off i think get it somewhere and test it

also check the drum as most of this range use a steel coated drum with an alloy rear. the rears have a habit of corroding through

i may have the odd spare for these but a panel is not among them

Dave

[electrofix]

Re: Beko DSC85W

i agree but they do say they have modded it and used a sealed NTC to stop moisture ingress
but that still wont stop them failing
there is probably another one that would go in but if you fit a non standard part and something goes wrong !!
not worth the risk

Dave

[electrofix]

Re: Beko DSC85W

checked this model on the beko site and no new element only

dave

[Author]

Posts