electrofix

Forum Replies Created

Viewing 15 posts - 18,121 through 18,135 (of 19,550 total)
  • Author
    Posts
  • in reply to: Arrow Cooker has died. #382633
    electrofix
    Moderator

    Re: Arrow Cooker has died.

    arrow was a cheap range of cooker sold by B & Q

    spares are difficult to obtain but there may be one that will fit


    look here
    http://www.ukwhitegoods.co.uk/search/fi … ineer.html

    to find an engineer

    Dave

    in reply to: RSH5PTTS1/XEG #382608
    electrofix
    Moderator

    Re: RSH5PTTS1/XEG

    try to pm R600a he has access to samsung info

    Dave

    in reply to: Dyson CR01 – Restore contra-rotation functionality #382205
    electrofix
    Moderator

    Re: Dyson CR01 – Restore contra-rotation functionality

    what you are after is a timer with the original software.

    I had a customer scrap the machine because of the work involved in freeing the inner drum so there are lots still around

    look for a faulty one with F1 fault, drum overload, which normally means the inner drums are siezed

    would look on ebay and see what turns up


    Dave

    in reply to: Electrolux EOB6300 ex display wiring diagram needed #382162
    electrofix
    Moderator

    Re: Electrolux EOB6300 ex display wiring diagram needed

    looking at the oven info it is unlikely it has a display mode but have you looked for loose wires

    if i was going to disable the oven i would probaby take wires off the elements and tape them up or if no functions where required except clock take 1 wire off clock

    Dave

    in reply to: Electrolux EOB6300 ex display wiring diagram needed #382161
    electrofix
    Moderator

    Re: Electrolux EOB6300 ex display wiring diagram needed

    you may be asking the wrong question

    Does anybody konw if this oven has a display mode?

    If so how do you get out of it ?

    Dave

    in reply to: whirlpool D/Washer ADG 6340 1X #382189
    electrofix
    Moderator

    Re: whirlpool D/Washer ADG 6340 1X

    its got all the hallmarks of a programmer power supply issue

    check pcb to see if power supply is series capacitor or switch mode

    check here for more info

    trade-technical/simple-pcb-repair-tips-t51155.html

    Dave

    in reply to: Dyson CR01 – Restore contra-rotation functionality #382203
    electrofix
    Moderator

    Re: Dyson CR01 – Restore contra-rotation functionality

    not got a lot of info but my thought are the following

    had a few of these machines where the innner drum spider corroded causing the inside drum to come forward and jam. from what i understand dysons answer was to change software to stop contra-rotation

    unless anyone else knows different

    to put things into perpective. these machines do not conta-rotate during the whole wash cycle. it is a 30sec or so action every so often. so over 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time the drum turns as one

    Dave

    in reply to: dip/ whirlpool d/w flashing #381890
    electrofix
    Moderator

    Re: dip/ whirlpool d/w flashing

    poss power supply capacitor in programmer

    see here

    trade-technical/simple-pcb-repair-tips-t51155.html

    there is quit a lot posted on this by myself and others

    if you need more help ask

    Dave

    in reply to: Bosch dishwasher module slim relay #381868
    electrofix
    Moderator

    Re: Bosch dishwasher module slim relay

    i dont know you did not put the relay part number on so i could search but from you info i found this

    http://uk.farnell.com/te-connectivity-o … dp/1282786

    i know its Farnell but if you register your c card as corparate its gets round the min order or it did last time i used it

    you will have to check sizes and then search rs


    Dave

    in reply to: Zanussi condenser dryer fault codes ZDC67550W #381595
    electrofix
    Moderator

    Re: Zanussi condenser dryer fault codes ZDC67550W

    pro corner is the Electrolux tech info access site. can only access if you spend £1000 with lux per year which i think is high and beyond me

    Dave

    in reply to: Samsung RS20CCSV #381624
    electrofix
    Moderator

    Re: Samsung RS20CCSV

    suggest you pm R600a ( see moderators ) he has access to samsung info

    Dave

    in reply to: bosch code #381601
    electrofix
    Moderator

    Re: bosch code

    model number does not seem to be correct please check

    also what appliance is it washer / dishwasher ?

    check to see if any of the light flash a sequence
    ie 4 flashes stop then repeat

    Dave

    in reply to: whirlpool oven akp203/ix not working since power cut. #381579
    electrofix
    Moderator

    Re: whirlpool oven akp203/ix not working since power cut.

    dont know the oven but

    long shot

    has it got a child lock ?

    Dave

    in reply to: matsui mf160 #381517
    electrofix
    Moderator

    Re: matsui mf160

    firstly is the dishwasher plumbed into cold or hot water?
    If hot then that could be where you heat is coming from and your heater may still be faulty


    Dave

    in reply to: Zanussi WJD1257W Washer/dryer pumps & fills #381508
    electrofix
    Moderator

    Re: Zanussi WJD1257W Washer/dryer pumps & fills

    agree with above
    but if you let me have your email will send you tech manual

    let me know prod number if you have it there are 3 on my disk and they may differ
    91460140600 or 91460140601 or 91460141500

    Dave

Viewing 15 posts - 18,121 through 18,135 (of 19,550 total)