[electrofix]

Re: AEG L16830 w/dryer

have you checked pcb for damage if the element had blown

have emailed info to your repairs@ email address hope it helps

Dave

[electrofix]

Re: AEG L14500Vi filling on drain cycle

no clues apart from faulty wiring due to the dipstick (repairing the bearings) factor

have got all tech info for pnc code 914510114 00
and 914510122 00

let me have your email address if this will help

Dave

[electrofix]

Re: A WOMAN’S PERSPECTIVE

maybe it looked like her partner before she kissed him lol

[electrofix]

Re: samsung Q1244S te fault

looks like connect have them comes with the heater

if you look on 4ourhouse.co.uk

you get

http://4ourhouse.co.uk/cgi-bin/product. … del=q1244s

hope this helps

Dave

looks a bit like a hotpoint one ntc might be the same

[electrofix]

Re: Wpl Top loader washers

there is a spin clutch on top of the gearbox

481969018152

check for oil contamination from failing gearbox seals

its an easy fit though you can drop the box in under 15 mins

Dave

[electrofix]

Re: Belling 627w

short the clock out and see if it works

Dave

[electrofix]

Re: Electrolux EOB5630X 944182598

sorted it check you inbox

Dave

[electrofix]

Re: Siemens American KA58NA40GB/06 ice make sensor?

start here

http://shop.bshappliancecare.com/

go to siemans tab put you e number in

result complete parts info

Dave

[electrofix]

Re: zanussi zwx1506w washing machine

if when you press any button machine just beebs and lights flash

try the following

disconnect the lead to the front control panel to the main pcb does not matter which end you disconnect all other wires must be intact

plug machine in
turn on and wait 5 secs or so
turn off
plug lead back in
turn on and see if it works

Dave

[electrofix]

Re: Electrolux EOB5630X 944182598

let me have an email address

Dave

[electrofix]

Re: Electrolux EOB5630X 944182598

the only one on lux info is basic
no wire colours but you are welcome if you want it

Dave

[electrofix]

Re: Zanussi ZWD12270W1 washer dryer shows ED1 fault code??

fault is listed as
wiring fault between PCB and WD board, WD board faulty, PCB faulty

i assume they mean the main pcb and the dryer pcb but the info is a bit wooly

time to pull all multiconnections off and put them back to see if its a bad connection

hope it helps

Dave

[electrofix]

Re: Zanussi TLE 1116 top loading washing m/c

sorted check your inbox

Dave

[electrofix]

Re: Hotpoint 9536 s/n 83183406 Suspension given up.

as machine is washing tap the timer with a screwdriver
if machine surges poss dirty timer contacts
check connector to module if not making good contact can cause this

Dave

[electrofix]

Re: Zanussi TLE 1116 top loading washing m/c

you need to enter diagnostics to get proper fault code
if you want some light reading give me the product code
( there are 6 machines with same model number )

and an email address

Dave

[Author]

Posts