[electrofix]

Re: Baumatic BDW5 odd fault

if memory serves me this is an integrated machine and the buttons you talk about is more of a plastic membrane with bubbles on it one for each programme

i have had it before these buttons fail they use a switching system which in laymans terms means if 1 track breaks more than 1 switch will stop working

you can get them on their own but some of the prices quoted for them is silly so dig around i think i got the last one from masterpart

Dave

[electrofix]

Re: beko oven d533

from what i can see this is a standard hydraulic stat therefore
if the red light is on the element is powered

in short change the element

as a check you could turn it on and check for L + N at the heater

Dave

[electrofix]

Re: Miele s5210 vacuum cleaner

Klixon is a name i associate with thermal cut outs on fridge freezers etc

hope this helps

Dave

[electrofix]

Re: zanussi d w zdf 601 911916269/02

from manual

Motor triac short-circuited
(the washing pump runs uncontrolled at
maximum speed)

have got service manual for /01 model if it helps

hope it helps

Dave

[electrofix]

Re: boot rubber

take the front off the machine same as hotpoints bosch etc

Dave

[electrofix]

Re: whirlpool k20 icemaker agb 022

fault sound about right

ring ASD 01133936680
see what the part costs and whether you need a mortgage or not

it is a whirlpool lol

Dave

[electrofix]

Re: Siemans WT36V398GB/08

not done one of these myself but

by the looks of it take the sides off and take it from there

go to

http://shop.bshappliancecare.com/

and look at the breakdowns might help

Dave

[electrofix]

Re: widl126uk light 2 / F04

had this fault a few times on the hotpoint wd

its always the board send to emw

Dave

[electrofix]

Re: Belling, no grill or hotplate?

come on its a Beko does anthing they do make sense 😆

Dave

[electrofix]

Re: Built-in electric oven with a max depth of 300mm

title says 300 text say 535 bit confusing 😕

dave

[electrofix]

Re: Grill burner for Stoves Oven

dont know if will help but look at this

http://www.guardian.co.uk/money/2006/ma … tocomplain

its an oldish article but a bit of googl searching and a call to trading standards might clarify

DAve

[electrofix]

Re: Motor Control Module for Hoover 1100 Model A3392

have you asked EMW this is the sort of module they may do without exchange if they have one

also module seems to be still avail pt no 09063348

Dave

[electrofix]

Re: Zanussi FJS1597W don’t know what else to look at???

if you want the manual let me have an email address

Dave

[electrofix]

Re: Dyson washing machine stuck in test mode

as far vas i know should not be a problem

Qualtex label it as programmed control pcb

so should be plug and play and is very easy to remove

Dave

[electrofix]

Re: Maytag MDE10CSAGW Dryer

dont know about later electronic types but early ones where mechanical

and this was an adjustment so when you put a coin it it pushed the timer unit the futher it was pushed the more time per coin

you could ring JLA on 0800 7838354 and see if you can get a user manual as this will tell the user how to alter price

you may need to find the make of the coin mech fitted as these were not always fitted as standard

hope this helps

Dave

[Author]

Posts