[electrofix]

Re: Help for Finnish engineer.

did a google search seem to be a Lavertherm T560 no info on british disc

http://www.witgoedwinkel.nl/index.cfm?f … 17AEBBA962

hope this may help

Dave

[electrofix]

Re: HP wf440 Unknown bearing set.

has bearing spider got brass ring on it like wm series

opened a sealed tub once they use spider with brass ring

Dave

[electrofix]

Re: aeg d/w

dont forget could be a loading prob ie large items directing water at seals

see if door will adjust may be leaking at top and running down

check bars for blockages the more that are blocked the more force the rest have

hope this helps

Dave

[electrofix]

Re: Bosch washer dryer

as with any condensor dryer of this type machine will breath as washing tumbles so you may get some condensation. there is no air inlet so air cannot continously get out. this should be no worse than putting machine on boil wash

hope this helps

Dave

[electrofix]

Re: w/pool auto

like all traic faults if you can get at it you can change it

but had a lux machine once gave same fault and turned out to be earth fault on motor

hope this helps

Dave

[electrofix]

Re: indesit WI 141

any ideas please ?

[electrofix]

Re: Hotpoint Drum/Spider Advise

have got bots out sometimes after heating with blowlamp but most of the time drill is only answer

using a 30 torx head on these bolts is silly 40 would be nearer the mark but no doubt indes**t had there reasons

Dave

[electrofix]

Re: Whirlpool 3RLSQ8033SWD

dont know exact model but doing search on google looks like a std type of top loader

remove 2 screws in control panel 1 left hand side 1 right can be on front or round the back slide panel forwards and lift and hinge back with as to not snap plastic hinge

remove eletric plug to lid switcn

remove 2 metal clips left and right

the complete case will now hinge forward and slide off

really easy in fact most jobs on these machines are easy you can change the box in 30 mins

hope this helps
Dave

[electrofix]

Re: Proline TDV60 Dryer

fit bet around drum

leave drum out of front bearings

stretch belt over motor bit of a fight but easier with front of drum out

pull drum up into front bearings

slowly revolve drum to make belt straight keeping an eye it does not drop off

refit sides and check

missed small bits out but in a nut shell thats how i have always done them

Dave

[electrofix]

Re: Kirby 3CB

ring kirby as if it is your machine and ask advise

0800-328-1247 kirby cust services

they may email you a breakdown or user manual that would help

Dave

[electrofix]

Re: Cannon Henley 10685G fan oven fault

have not got wiring diag fo this but i would trace wireback from motor to stat/switch sounds like contact in switch has failed

a mulitimeter should find it

Dave

[electrofix]

Re: fagor innova FU6146IT

thanks can we have these fault codes in the sticky along with any otherts it has

Dave

[electrofix]

Re: Bosch WFF2000

does motor reverse in wash

if not check pcb relays

Dave

[electrofix]

Re: siemens door lock light

yes it does have child lock

download user info from here

http://www.siemens-home.co.uk/home/cust … vices.html

looks like you hold start button for 4 secs to deactivate

Dave

[electrofix]

Re: Warning fill hoses faulty

bet that made you scratch your head for a while you just dont expect it

lol

Dave

[Author]

Posts