Forum Replies Created
-
Posts
-
mag seems to be 2m261-m32 which is on aswo for £42 +vat for gen panasonic
the inverter you need the numbers off it will be something like F606y etc printed on the coil
has inverter burnt out? have you checked. normally blows internal fuse when they do
Dave
my guess would be dampness in the control knob on the front display board
hoover auto used to do the same thing when the selector sw failed
if so it may be possible to clean it
Dave
looked at Beko tech and they dont list a brush
there are 3 part numbers listed for the motor
28265201002850310100
2838520100
the only 2 i can find pics of use the common car140 and the brush I listed above. Even in the disassembly manual it shows a motor with car 140
This machine is the chinese built machine
dont think you can get them as far as i can see quickly
think this is the motor type
https://www.blombergparts.co.uk/moto…ery=GJ-2UA022AAll I can think is try to find and replace just the carbon from another brush
Dave
[USER=”2″]kwatt[/USER] have you any idea K
as stated cant see your pic but
the only oddball brush from Beko i can think of is
https://shop.ukwhitegoods.co.uk/washing-machine-carbon-brush-set
also available from aswo but beware they are sold in 1’s
Dave
the rinse temperatures are much lower than older units to save energy. the door is opened and they air dry using a combination of air and rinse aid
Dave
different elements can be fitted to dryers with the same model never mind with a different one. changes can be element type ot thermostat differences
its worth checking
front themistor should be 62000 ohms at 20 degrees while the heater one is 124000 at 20 degrees
Dave
to upload pics host them on another site and post public links
looks like you have a later motor and fron what i remember you have to release the motor and use it as a lever to tention the belt
Dave
think you have been unlucky. which ever dishwasher you buy might well have the same valve or at least from the same manufacturer
if the valve stuck then even turning off the plug wont stop it but if you did switch off and it stopped then it would be a unit fault
some units have a special hose that will only allow so much water till a special valve stop the water going in
Dave
according to Beko fridge seal part no is
4663520100
site listing for the part is here
https://shop.ukwhitegoods.co.uk/4663520100-fridge-freezer-door-seal
shows as 5 to 12 days delivery but you need to check that. you may also notice the seal fits some lamona appliances as Beko make some units for Howdens
looking up part no on google you get
https://www.lamonaspares.co.uk/p/fridge-door-seal-a4663520100
they are saying available for next day delivery but again i would check
Dave
