Forum Replies Created
-
AuthorPosts
-
electrofix
Moderatorthere seems to be a numbers of different configerations of this but they all seem to pull off and just click back on
try posting a pic. if too big you may have to host off site and post a public link
Dave
electrofix
Moderatoraswo are showing a door seal in stock
its the only part they have for this machine
Dave
electrofix
Moderatorwell need to know the model
early models are a cheap plastic frame later ones need a new panel
you would need to be able to remove the front panel and unclip the electronic board to access
Dave
December 23, 2024 at 10:44 pm in reply to: AEG FSE83837P (911434658 02) Integrated Dishwasher #491961electrofix
Moderatorhave you got lux tech access ?
Dave
December 23, 2024 at 8:58 pm in reply to: AEG FSE83837P (911434658 02) Integrated Dishwasher #491959electrofix
Moderatorwell 3 fault codes are associated with aqua control which is the float in the base of the machine. underneath where the motor is
check for water and check base has not been distorted activating the switch
Dave
electrofix
Moderatorthey use virtual sensors
they monitor the current to the drian pump to determine when its empty
daveelectrofix
ModeratorDecember 18, 2024 at 11:37 pm in reply to: Washing machine door seal replacement without removing front panel #491927electrofix
Moderatorsome you can but not with Samsung as far as I am aware
Dave
electrofix
Moderatorthese units are american maytag machines
https://www.partadvantage.com/modelp…d/3LWED4815FW0
Aswo has part diagrams as well as the above stat kit in stock
Dave
electrofix
Moderatorno experience of this one
but have you tried the normal disconnect drier element as a long shot ?
Dave
electrofix
Moderatornot seen many but any i have I tell the customer i cant lift up or down on my own so they have to help
Dave
electrofix
Moderatorit possible but you have 2 thermal cutouts in circuit and the clock as well
Dave
December 15, 2024 at 7:22 pm in reply to: AEG PNC 911 514 036 02 : drain pump running and ‘i44’ in display #491915electrofix
ModeratorI44 is a pressure switch problem
find the switch and check the switch and pressure chamber for blockages
Dave
electrofix
Moderatorno manufacturer supplies the same stat at 2 different part no and prices
there is a 10 degree difference in the stats plus it looks like one has 3 terminals the other has 2
I have found it priced at £45 but they have to order it so check prices first
Dave
electrofix
Moderatorall you can do is take the covers off and with care and safety in mind operate it and see if you can determine where the noise is coming from
Dave
-
AuthorPosts
