Forum Replies Created
-
Posts
-
well, it wont if its stuck on 10 mins
anything under 10minutes is a cool cycle, so wont dry
interesting fault.. does it just stay on 10 mins?
does it never count down
they were notorious for sticking buttons… u may find one of the buttons is constantly depressed
first thing to do is take the lid off, then the fascia, then the pcb, and refit it all properly and see how you go
its unusual for a fault without a fault code of some sort
not if you change them before they do any damage
they should be ok if the fuse hasnt tripped or anything
no cure im afraid
they broke even without the freezing
the only answer is a new hopper assembly, with a different valve
p/num
c00268761
e3 is drain out failure
if its draining ok, change the heater, whether it checks out or not
common fault
a lot of manufacturers now recommend the ambient temperature should be over 12 degrees
seems strange its been alright for 11+ years though
might well be worth trying a thermostat
its very unlikeley a system problem
for future reference guys – and try and keep this in mind
these machines are a real pita
turning themselves on in the middle of the night.. even doing it as you walk past them
anything strange goin on with them, change the ntc … its a common part …. c00083195 (?) its the same ntc as the wash ntc, so its an easy job to just plug one in to see if the fault cures
good luck!
that part you have 2101105544 is the correct part, just rewire it and mount it on the plate on the top right of the cavity
much easier than having to change the old inline fuse
for once martins right… grind it flush if u have to
they want u to think its b.e.r
but thats what i do anyway
theres more than likeley someing stuck in the neck of the pipeleading from the drum to the pump
its not uncommon, and the pipe can be a pig to get off
plug out, and work safely if youre trying to get at it
