Forum Replies Created
-
Posts
-
Re: Indesit WD10
yer mootors probably duff
common fault on indesi machines that.. door locks.. nothing
check brushes/armature/coil… but please, unplug before checking
Re: Recommend a Washer/Dryer?
advice?
look at the hotpoint, turn 180 degrees, and run as fast as u can, let nothing stand in your way.. they really are THAT bad
zanussi washer/dryrs tend to be reliable, but ultimately, if u can have seperates, do so, and buy nothing frm merloni (indesit/hotpont/creda)
just look around the forums, ull see what people have to say about unreliable electronics n the merloni machines, naff dryer boxes, etc
seperates is the best way
and in that case, bosch/siemens/miele arer the best
hope this helps
helo
Re: hotpoint vtd00 pulley
thats the one!!
cheers penguin, now the fun starts
use an old belt to pull the belt over the new pulley
readin other sections, people have been struggling a little.. they are tight
make sure ur hands are protected, its tight, and if u slip.. ouch
Re: Dyson DC01 Belt Breaking
yup
the roller isnt running straight
its because the hood isnt on properly
youll probably find the opposite hood bush has come away
on the other side of the cleaner from the belt, ull see a round yellow (or blue ) fitting , the hood will have come away
bit awkward to put it back on, but it will go
hope this helps
Re: Hi
id be checking the internal duct pipe hasnt come off , usually if the machine gets too hot in the front the duct stat should switch the heater off
very simple to check
if u look thru the hole in the back, where the vent hose clips, u should be able to see a black tube leading from where the pipe fits on the rear to the front duct
itll be very obvious if its wrong
its as easy as refitting it by removing the 2 screws on the back, and pushing it back on properly
was the dryer ok before you changed the belt?
Re: Samsung Q1235s
hmm 4e is the usual water level code
unplug, take off top, check the weight hasnt been rubbin on the bottom of the presure hose, thats more common than jade goody
seen a few of these in the field, just a matter of cutting down and re-attatching the hose to the switch
oh, and move the switch, ull see why, samsung have mouned it in the most ridiculous place ever
hope this helps
id be checking the heater too
does it spin?
u could be a bit more specific.. like i say, 4e is the usual water level fault
hope this helps
Re: hotpoint ctd85 dryer
then theres the fans, capacitor, motor conversion, jockey pulleys.. even the cabinets are crap, vibrating, not fitting right, warped condensers, blocked drains… the list is endless
would be easy to list the good things about these dryers
ill start with
erm…
erm…
ahem,
ermis there ANYTHING that lasts on these dryers?
Re: American Style Fridge/Freezer, reliable and value for mo
yep.. the lg seems to be a reliable machine
the samsung.. well, just take a look around.. poor is a good word to use
the whirlpool isnt so bad since the changed the motorised baffle
but id certainly go for an lg.. quality goods at reasonable prices
Re: Indesit W103
funny thing hope
when was the last time u saw one of them and it WASNT the heater relay?
lol. merloni.. gotta love em
