hotpnt

Forum Replies Created

Viewing 15 posts - 451 through 465 (of 719 total)
  • Author
    Posts
  • in reply to: Indesit DW IDL530UK2 4nd LED from left flashing #237041
    hotpnt
    Participant

    Re: Indesit DW IDL530UK2 4nd LED from left flashing

    hi, the wash light will flash at end of programme, its only a fault indicator if you cannot then clear it & run another programme,

    in reply to: hotpoint ff72p mistral fr/fz #237046
    hotpnt
    Participant

    Re: hotpoint ff72p mistral fr/fz

    did you take the fan surrond off completly? sometimes a small layer of frost wil build up across the top of evaporator which cant be seen without removing the surround

    in reply to: Indesit WIL 163 #237029
    hotpnt
    Participant

    Re: Indesit WIL 163

    most likely the module not reading the therm, new board time

    in reply to: Hotpoint 6160 Main oven hinges #237013
    hotpnt
    Participant

    Re: Hotpoint 6160 Main oven hinges

    hi looks like his is the old one with main oven on top?, if so top hinge kit is listed as 613602

    in reply to: hotpoint CTD80 belt loose #236884
    hotpnt
    Participant

    Re: hotpoint CTD80 belt loose

    hi helo, you on day off today then?

    in reply to: indesit wd12xuk #236878
    hotpnt
    Participant

    Re: indesit wd12xuk

    need to know the number of flashes, this is the evo 1 module i think, so the flashes will tell you where the fault is

    in reply to: REDUNDANCIES AT COMET #170010
    hotpnt
    Participant

    Re: REDUNDANCIES AT COMET

    your lucky kiddo, dead dead quiet last few weeks, hardly any work around

    in reply to: Indesit IS60VUK T/D: no start? #236824
    hotpnt
    Participant

    Re: Indesit IS60VUK T/D: no start?

    hi, the relay would only click if the door lock was closed, only way to check is by-pass the lock

    in reply to: indesit wd12xuk #236876
    hotpnt
    Participant

    Re: indesit wd12xuk

    light flashing how many times==fault code, or just a very rare chance the module has failed

    in reply to: Hotpoint DRYER vtd00 (or similar) #236842
    hotpnt
    Participant

    Re: Hotpoint DRYER vtd00 (or similar)

    then it cant have a pump!, has to be the door lock really

    in reply to: Hotpoint DRYER vtd00 (or similar) #236840
    hotpnt
    Participant

    Re: Hotpoint DRYER vtd00 (or similar)

    hi, if it has a pump that is running it must be a CTD condenser model, the door switch at the top often jams so that the door can be opened & it still runs, the door catch is seperate

    in reply to: Hotpoint WD440 flashing ‘wash’ LED. #236501
    hotpnt
    Participant

    Re: Hotpoint WD440 flashing ‘wash’ LED.

    that’ll be why im sat in my van all day with nothing to do lately then, they’re all buying other stuff 😥 great to have so much spare time for xmas shopping, not so good for paying the bills 😥

    in reply to: Indesit IDL705 #236756
    hotpnt
    Participant

    Re: Indesit IDL705

    if all else tests ok, then most likely pcb relay, easy board swap

    in reply to: hotpoint aquarius wd420 washer dryer #236672
    hotpnt
    Participant

    Re: hotpoint aquarius wd420 washer dryer

    hi, if the wire had come off the element it can short onto the heater box, had it several times!

    in reply to: Hotpoint WD440 flashing ‘wash’ LED. #236498
    hotpnt
    Participant

    Re: Hotpoint WD440 flashing ‘wash’ LED.

    maybe it thinks its a set of xmas lights??

Viewing 15 posts - 451 through 465 (of 719 total)