karv

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 119 total)
  • Author
    Posts
  • in reply to: Diplomat ADP 8332 not heating water #268672
    karv
    Participant

    Re: Diplomat ADP 8332 not heating water

    hi my guess will be faulty ntc probaly the old type with 2 gold tags new type comes with a block connection.

    in reply to: Cookers Appliances Cooker advice appreciated #268213
    karv
    Participant

    Re: Cookers Appliances Cooker advice appreciated

    i don,t reconise the model number tho i don,t have any numbers in front of me but that sound like the range oven if so .
    depends if left or right is 1 for each side , depends which oven u turn on remove screws at back at top and all burner screws.
    inside there be a wire going to the lamp holder to a mini heat coil forgot its name small white retangle and once u turn oven on the oven the lamp socket power the mini heat coil which sits next to the stat and powers ya fan up , once u turn oven of = turning of lamp the mini heater coil cools down slowly cauing ya oven fan to turn of , the coil sit against the stat u need to replace the small stat can,t miss it, this is semi guessing hope it helps

    in reply to: Diplomat Dishwasher #267954
    karv
    Participant

    Re: Diplomat Dishwasher

    connection block on the dispener inside of door on left hand side of dispencer, normaly there a tiny hook holding it in and the little block has comes out like 3 mm ,

    in reply to: Diplomat Dishwasher #267951
    karv
    Participant

    Re: Diplomat Dishwasher

    before u buy a new dispencer check the connection block to dispencer has not moved out of its socket,
    you will find that is the problem most of the time on this model.

    in reply to: diplomat dishwasher adp 8630 #267582
    karv
    Participant

    Re: diplomat dishwasher adp 8630

    these maybe silliy ideas but u never know
    is the button stuck had a few where the decor door has been screwed to tight and is clamping the facia and holding down the button so u can,t push the button 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.
    have u held down the start button untill the light has gone out , and then try to change programe , these things can get very glitchey with power cuts it seems and the programe then gets stuck.
    also i think try and hold down the start button for some secs untill the light flashes and close the door and it will drain , this will abort any programe that is running , i think . then once it finished try to pick new programme.
    I would say if the start button light is off and the programe light is still on rinse and u can here the little click as u push the p button down i would guess for a faulty module or display pcb but that would be a guess.

    in reply to: fault FA code on Diplomat ADP8332 #266634
    karv
    Participant

    Re: fault FA code on Diplomat ADP8332

    it was late is my only excuess hehe

    in reply to: Diplomat select 620 Door has fallen off! #265922
    karv
    Participant

    Re: Diplomat select 620 Door has fallen off!

    they not obsolete yet.

    in reply to: diplomat adp5820 #266613
    karv
    Participant

    Re: diplomat adp5820

    if grill not working will most likely be element or energy regulator.
    i might be misunderstanding but im unclear about the fan is it 2 fan ovens + cooling fan ? or fan oven + conventional oven+ cooling fan?
    is there 4 sections grill + fan oven + conventional oven+ some type of storage section as 4th?
    if it is a twin fan oven should be ok to swap unless the fan looks diffrent.

    in reply to: Diplomat select 620 Door has fallen off! #265920
    karv
    Participant

    Re: Diplomat select 620 Door has fallen off!

    mfi / extracare

    in reply to: fault FA code on Diplomat ADP8332 #266631
    karv
    Participant

    Re: fault FA code on Diplomat ADP8332

    2nd and 4th screw remove them you have 2 brackets attached to door 1 each side then push door down . screws tighten a golded bracket that grips the white plastic that is on your doors and 2 metal hooks at top depending how your builders have done it. you don,t need door of to get in to base from front tho it does make it easyer
    power of before u look inside
    edited lol

    in reply to: Diplomat ADP 8242 – some programs never end. #260908
    karv
    Participant

    Re: Diplomat ADP 8242 – some programs never end.

    i,ve had that few times where it takes forever to heat up.
    unsure why tho . first time was the thermost replaced the black one with the new white one cured it
    second time did same thing did,t cure module/pcb was faulty replaced and it cured it.
    think i replaced the element on one of them as well for some reason , maybe was just in bad way or lime scaled up can,t remember now tho .
    ps also if your new dispenser got 4 slots and old 1 has 2 u got wrong dispenser, far as i kow there no modifcations to the dispencer wire wise , maybe diffrent conections aka spades to block holes but number of wires should be the same

    in reply to: Diplomat select 620 Door has fallen off! #265918
    karv
    Participant

    Re: Diplomat select 620 Door has fallen off!

    those oven doors are made up of few parts normally u get glass only.
    The diffrent parts that make the oven door are

    inner glass
    outer glass
    2 x black colums held in by 3 screws on each side , once u removed this its fairly straight forward and u can see everything.
    2 x small black blocks 1 screw in each at top
    2 x bottom hooks to stop inner glass falling down and out + need to remove these to replace hinges.
    1 x door handle plus 2 screws
    2 x door hinges 1 left 1 right
    2 x2 screws to hold door hinges in

    in reply to: Diplomat ADP5330 Not fully heating, different cut off temps #265846
    karv
    Participant

    Re: Diplomat ADP5330 Not fully heating, different cut off te

    people on he know more than i do but my view is
    unless i misunderstood the fault hehe
    i still think heat escape.

    in reply to: Diplomat select 620 Door has fallen off! #265914
    karv
    Participant

    Re: Diplomat select 620 Door has fallen off!

    if the oven was fitted there from new mfi/ extracare will have your model number on there system , going by ya postcode and address . if you can,t find it.

    in reply to: Another ADP8322 #265874
    karv
    Participant

    Re: Another ADP8322

    these are all guesses
    4 flashes= not draining
    4 poss out comes
    1 pipe or pipe to sink is blocked still have lots of water in it
    2 pump faulty or jamed still have lots of water in it
    3 pressure switch faulty no water cept in white sump
    4 pressure switch dirty no water cept in white sump
    do check if pressusre switch is blocked up, take filter and stuff out and look in to white sump u see black grid circle inside sump on the right hand side if this is grey or white all over it, it will need to be cleaned.
    some times if pressure sw is real bad cleaning it won,t help and it will need to replaced

Viewing 15 posts - 61 through 75 (of 119 total)