Forum Replies Created
-
Posts
-
Re: Strix to Diamond H ?????
just read your thread. it never ceases to amaze me how they can get away with instructions that are completely wrong. i once had a problem with a dual grill controller which took out the timer and selector switch. cost a fortune.
how can these guys be allowed to use the same terminal numbers for different purposes depending on controller. you’d think that thered be some eec harmonisation of all regulators irrespective of manufacturer. The lack of that coupled with wrong intructions should give us good cause to sue as its dangerous.
we might as well have a free for all on mains colour coding.Re: This Might Help Others Diplomat 8322 Repair
yes thanks for that. however there have been long discussions on this topic. i carry the reeds on van get them from cpc for about 50p. just swapped out an indesit fill matrix last week. gonna solder reed in old panel and try it on next job.
keithRe: prima lpr735 outer door rim.
thanks for your reply. customer in hurry (arent they all) shes ordered it from prima for £59.
Re: Hotpoint dishwasher dif16. First three leds
inlet matrix fitted and fault cured.
thanks for advice.
i’ll be soldering a reed switch into the old one to see what happens when i get a chance to try it.
keithRe: bosch shv55m03gb/40 dishwasher completely dead
dont rule out the possibility of dodgy connections at supply outlet. especially if wired into a spur.
Re: Candy CDI1012/1-80 Dishwasher
update!!!
turned up to find i’d the wrong module.
nessesity is the mother of invention. and so had a closer look and lo and behold a blown capacitor
1000mf 16v electrolytic.
as soon as i saw that, it was obvious that the symptoms are same as hotpoint washer board fault.
soldered a new one in and it works.mods might copy this to simple electronic repairs thread.
keithRe: Hotpoint dishwasher dif16. First three leds
tracked it down. its c00256546 not c00356546.thanks for the pointer though
keithRe: Hotpoint dishwasher dif16. First three leds
yes sorry misread your post. i do carry the impeller jugs for bosch. problem im having now is that the part number you quote doesn’t come up on masterpart site. i’ll have a hunt around.
Re: Hotpoint dishwasher dif16. First three leds
so basically yet another seized crappy pump. think id better start carrying one as a spare.
thanks.
p.s. browsing through thread whicjh is in no order on phone in poor reception, lifes too short. id far rather buy another book thats up to date.Re: Candy CDI1012/1-80 Dishwasher
hi jonnyj
ive got this exact same symptoms. did you ever get this problem sorted? im assuming module and at £30 quid its not too bad. just want to be sure.
thanks
keithRe: LG DIRECT DRIVE F1068QD
how did you get on with solving the lg problem?
also i’m keen to know how you are treated by their aftersales dept.
thanks
keithRe: LG 11kg load, who knows anything about these?
all i know about these is that i was amazed that a new gen door seal was only £11. hows that when you consider the price of a normal lg seal.
Re: White Knight Vented Dryer MODEL 42AS
dual circuit element?
neutral on element to toc then to neutral on block.
red wire to inner ring
black wire to outer ring along with black from backplate stat.
other black wire from backplate stat paired with black/white wire from exhaust stat then fixed to block.live to live
earth to tag
Re: LG Direct Drive Machines. Any Good?
i find that a bearing change on an lg is usually after 7 years or so. lets face it thats a lot better than the usual merloni garbage that can cost a lot more.
Re: LG Direct Drive 8Kg WM-12316fd spin/rinse problem
make sure you haven’t kinked the drain hose when resiting the machine.
also it wouldn’t do any harm to double-check all hoses for a partial blockage.
personally i think you should regard yourself as lucky to have bought an l.g. i think theyre great and far superior to the usual tat i have to fix every day.
