Forum Replies Created
-
Posts
-
Re: hoover VHC 180 diagrams
probably too late, but you can sometimes get access through the fan housing to the capacitor.
Re: Zanussi FLE1115 won’t start
i was sent barking up the wrong tree with a pressure switch error code once. and yes in the end it was the heater even though it megged over 50M
Re: hoover t/dryer vhc781 xtb
i refuse to work on these unless its heater unit or blown suppressor. lifes too short. the only short cut i know for some of these is that the motor capacitor can be accessed through the fan housing. ive got three sets of jockey wheels on the van but thankfully never yet been deserate enough to fit them.
Re: hotpoint dw model lft114
ive had this as well. unfortunately after spending ages soldering and heatshrinking a repair to about four wires i discovered that they must have shorted and blown the board.therefore id quickly splice and test then solder if ok.
Re: HNC170 NOISY
i dunno but the take him or her out and shoot them. how on earth gias guys put up with these is beyond me. i tend to refuse any repair that requires a total stipdown unless im absolutely needing a job.
having said that ive got one thats tripping on for tomorrow. hoping its the mains filter.Re: LG DIRECT DRIVE F1068QD
I sell quite a few lg mainly f1222td. There are never any excessive noise problems from the motor. The only thing in my opinion which let’s them down is the drain pump noise.
The spinning midcycle sounds suspect to me. Up here the inwarranty service is excellent. Without exception all my customers love their machines and recommend loads of sales to me.Re: Hotpoint 7822 dishwasher
every one of these ive ever been to is three fills.however lately i did have one that only filled twice, but only on one of the programs. we agreed that her best option was to use a program that worked properly.
other than that i’d say its a faulty timer. again a few years ago i think i remember only paying about £25 quid for oneRe: Hoover VHC381 Condenser Help please.
it was the front stat on both of the occasions that ive seen this.
Re: whirlpool adg7561 b in dishwasher
which tube do you mean. are you talking about upper sprayarm supply tube? if so then the way to stop it popping out is to get a small stainless steel self tapping screw and screw it through the cover so that it nips the tube. itll never come out again. ive probably described it badly but it is straight forward and it does work.
keithRe: whirlpool dishwasher adp5540
i think switch in sump will give either 2 or 4 flashes.
the six flashes is not filling fast enough. is the pressure o.k?
is the valve clogged pipe kinked etc etc?Re: bosch exxcell d/w no heat
just an aside to this;
i was faced with one of these not spraying properly and having removed the side panel i groaned when i saw the spray pump. however soon discovered that it comes out quite easily and was even able to dismantle it and remove the blockage. so don’t be put off these even though they look cheap and nasty like the whirlpool and indes{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}it pumps.Re: Another joke.
man comes in from work to see the washer banging around with the front feet propped up on bricks. he says to wife; ‘what the hells up with the washer?’
she says; ‘it’s doing a 30 degree wash’Re: Whirlpool 7560/1 Dishwasher
i have also fitted an in-line heater and separate pump. i thought i’d cracked it as well.but..
i cant remember how many flashes (long time ago) but it didn’t like it. so gave up as cost of original motor was more than they wanted to pay.
kRe: anyone have to hand rough smeg dw solenoid resistance va
ive fitted water valve coils to these dispensers even though the original is around 1.5k and the water coil is around 3.5k.they have always worked.
k
