Forum Replies Created
-
Posts
-
Re: tdl30 front bearer felt strip
gandh1 wrote: put it on and towards the bottom bit i find its a teeny bit large and gets “lumpy” where ive had to mke room for more than that what there should be.
If it was me, I’d just get another 5031680438390 and cut it to the right length and stitch it up again. Only take ten minutes.
Mike.Re: AEG/Lux L64810 914524150 00 Sticks On Cycle
Damp, usually in the form of condensation on brush holders, can give funny faults with Lux electronics. Worth checking that it’s all dry before giving up.
Mike.Re: zanussi zwf1237 e80
This might interest you.
zwd1472w
Mike.Re: bosch wfo2865gb/08
You might find this thread of use.
bosch+bearings
Mike.Re: Zanussi WD1012
Poor old dear. It’s sad that people should be skint at that age. But I think quite a few of us will be 🙁 .
Mike.Re: Zanussi WD1012
Can’t quite remember exactly how these things work but if she’s desperate why not leave the knobs off altogether and sell her a pair of long nosed pliers and a little training?
Mike.Re: cordon bleu mini kitchen 2046
Is it a solid hotplate 6″ or 7″? There are plenty of universal ones available. Tap in universal hotplate to connect’s search box.
Mike.Re: Bosch Dishwasher Pump 187970
Not sure. PMP9139 looks like same bayonet but impellor is different shape.
Mike.Re: Blomberg 1501AAA worth fixing?
Bearings are listed on Connect when you tap in 1501AAA but they’re not cheap. They give the seal dimensions under the picture and you can read 6305(?) just about on one of the bearings when enlarged.
Spider is obviously going to be more trouble. However, the bearings that come up are listed as WMP1500B (also fit your model). Now when you tap in WMP1500B you get 195 parts available including a spider(descibed as “bearing”). Good pictures; if you got the old one out you could probably say yea or nae.
Mike.Re: Zanussi sticking on cycle
Went to ZWF1432S this morning reputed to be stopping at various points in cycle. Pause may have been flashing but they didn’t mention it.
They didn’t mention either that it wasn’t draining :rolls: . Was elastic band firmly wrapped round impellor (Askoll). It took a pin to tease the last of it out. Was wedged in right against the rotor bearing.
Mike.Re: RANGEMASTER CLASSIC 110
Could try
P029549 Double energy regulator ego 50.55073.010
For model 7726 110 XT Ceramic black PH
which is nearest I can find.Mike.
Re: Servis M6712W
Connect says
handle 32400400 obs/temp unavail.
kit 719008100 ditto
Mpt has 719……. in stock @ £9.99
Mike.Re: Miele W304.
She was really pleased that I’d been able to fix it. Think I might take half an hour to do the next open door I get and double the price 😆 .
Mike.
