Forum Replies Created
-
Posts
-
Re: adp8224
“Panel: control fascia”? 5031680111965 @ Connect £26.46 etc. Not much of a saving.
004993736190 @ Masterpart POA.
Mike.Re: cant find any parts listed for a belling IDW604 Dishwash
5045173343016 at Connect is described as Timer board for that model no. but no pic.
Mike.Re: Parts from Connect tampered with by Joe Public?
Wonder if Bosch sell on their customer returns to Connect?
mike.Re: LG WM1480FHD
Seme used to have lots of LG stuff at half the price of elsewhere. Sadly they seem to be running down.
Mike.Re: LG WM1480FHD
The seal on its own seems to be in stock at Connect 5031689504300. Size is quoted as 37/76/9.5 so it should be possible to work out what the big bearing will be. I think it’s a 6306. Small one 6305?
Mike.Re: Bosch wf02 xl 1200
Found a penny stuck in the outlet pipe of the filter housing the other day. It was a perfect fit, creating an intermittent flap valve but very difficult to find. Might be worth a quick look as you’re going back anyway, although you said you’d checked the pipes.
Mike.Re: Hoover HNF7138-80
Had an earlier(?)model HF7130M the other day which didn’t spin and it was heater down to earth.
Mike.Re: Zanussi FJS1197W 914788514/01 no fill & no motor act
Well, went back here this morning, taking an EMW replacement with me and diagrams supplied by Chris.
Turned out to be a couple of connectors had got kicked loose on rear of module. Was inside the grey plastic bag so had not seen it during reassembly. Must remember to check around there next time.
Thanks for the help, guys.
Mike.Re: Beko WMA765S a/w
Penguin45 wrote:Door open light stays on.
I assume you mean the door doesn’t lock.
If so, 2 x 240 sounds like one too many. I’d open the old interlock and find out which wire was meant to be neutral, assuming switching is on live side. If one of your 240 should be 0 then follow that wire back to board.
But I suppose with a huge workload like yours it’s easier just to order up the board (£30+) and try it. 🙂 Terminal 4 is probably to do with door open light, like on Zanussi but in reverse.
Mike.Re: Beko WMA765S a/w
No neutral to lock? > examine board for burnt tracks?
Is it just coincidence that board is only 3rd in connect’s list for this model?
Mike.Re: Hoover HNL6166-80 Bearings
Phidom wrote: same O/D and I/D as a Zanussi 1000 spin seal but 1.5mm thicker
Sounds like you might be best to put in 1.5mm of packing behind the seal before pressing it in. Maybe a suitably sized circlip or two?
Mike.Re: Siemens WM50201GB/01 spider.
Thanks for trying lerch but that’s the “bearing cross” which is the housing for the bearings which bolts on the back of the outer tub. I need the spider which bolts on the back of the inner drum. (p/no. 233132 is inner drum complete).
Not heard back from bsh yet.
Mike.
