Forum Replies Created
-
Posts
-
Re: UKW cheaper than Connect for some spares?
Seme used to do LG parts at about half Connect’s prices, so maybe Dave bought a few of these spiders from them a while ago. Looks like Seme are getting out of white goods now as fast as they can offload the stock. They don’t seem to have much left at all. 😥
Mike.Re: UKW cheaper than Connect for some spares?
Still seems rather cheap for UKW to be selling them at only £4.27 profit?
Connect’s SRP is £56.86. Is UKW some sort of charity?
Mike.
Edit: And I bet if you checked espares et al you’d find that price.Re: bosch d/washer sgs55c02gb/01
Minge wrote:water is coming out of the lower one but not at enough pressure???
The hose from matrix to sump getting gunged up can also have this effect.
Mike.
Edit: But then again it probably wouldn’t turn the top one either.Re: Gert big Bosch problem:(
Just the spare parts illustration.
If you found that exploded diagram,I would have thought that 4 screws (0108) covered by 4 caps (0109) would get the fascia off. Then you go to page 4 to find wirng harness to pump (0435).
HTH, Mike.Re: Gert big Bosch problem:(
Penguin45 wrote:Link is just the options page, Mike.
Chris.
Funny, I checked it before posting.
Re: Gert big Bosch problem:(
https://www.bosch-eshop.com/eshop(bD1lbiZjPTAwOQ==)/bosch/gb/prodp.htm?prod=WBB24759GB{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2f01
Exploded diagram. HTH?
Mike.Re: Beko d/w DE3431FW
Actually, decided not to wait for the interminable time that an OOS part might take and just try a new board (only £12 trade). Fitted it today and it’s now working again.(Touch wood). When pulling old board out, flimsy ribbon cable broke off from it’s solder connections at board. I’m thinking I might have damaged that when taking a look on first visit. 😳
Mike.Re: BEKO WM1715S
Unless you have a dodgy new board, it sounds like a motor problem. Motor plug wiring? Pull at each in turn to see if any are loose each side of plug.
Mike.Re: Plastic bags to protect modules from damp.
Hardly any difference in price, as with Roly’s you get twice the quantyity.
Mike.Re: How to reset an Indesit WIA101.
Take out the module. Place in microwave for 15 mins on full power…..
Oh no, sorry, that’s the 103.
Er don’t you just set selector to a stop position, wait a few seconds, or 30 if you want to make sure, then re-programme and press start again?
Mike.Re: What are the best quality bearings and where do you buy
Hi Turbo, you sure it’s not just the noisy motor bearings getting transferred through the belt? (Assuming you’re referring to 95/WM series).
Mike.Re: Beko D 3422FS dishwasher won’t stop filling.
Thanks Don. Do I have to register and pretend I’m interested in working for them :rotfl: then ?
Mike.Re: Beko D 3422FS dishwasher won’t stop filling.
Went back to this today. Checked timer motor and it metered out ok. Re-checked pressure system and switch and now the filling does stop when I operate p/sw by blowing. But in normal operation machine continues to overfill.
Was scratching my head wondering if p/sw could go out of calibration, when Mr. appears.(Up to this point I had only met Mrs.). He then proceeds to tell me that he had removed the timer to have a look at it as he suspected it (before my 1st visit) and when replacing it was not sure about reading his own wiring diagram as he had not distinguished betwwen black and brown, marking them both ‘B’. 😡 👿 .So now I’m looking for a wiring diagram. Did I read somewhere that Connect had them? I can’t seem to find them there.
Mike.Re: smeg d/washer dwd1sse,no go?
Have you looked in the “known error codes” thread towards the top of the forum?
Mike.
