Forum Replies Created
-
Posts
-
Re: Hotpoint WD420 Mains suppressor caught fire
Have seen this on an Ariston. Seem to remember there was some sort of vent (?) hole about 5mm, in dryer alu ducting. Can’t remember if I decided to block it. But whatever I did, not been called back.
Mike.Re: masterpart ebay shop
Hmm Just browsing through his feedback.
806890386 Genuine Smeg fan ele £14.99 incl VAT (& carriage 3-5 days)
Masterpart £25. (2 for £14.49) + VAT
Does seem we’ve been had.
Though, as I’ve said many times, I’ve been getting cheap and good elements via ebay for years now.
Just search for the one I want, select from drop down menu, “list in order of price incl carriage lowest” (or words to that effect) & take my pick.
Mike.Re: masterpart ebay shop
Business seller information
Spares4Appliances
Paul Finch,
688-692, London Road,
Westcliffe on sea
Essex
SS0 9HQ
0871 8119111Item number: 120667651481
2100W element for Beko cooker.
£4.79 incl courier del 3-5 days
or add £6.50 for 24hr delivery. (additional item £4)
30,000 + feedbackIs this Masterpart?
Mike.
Re: indeshit…
Quite surprised to see a Candy last that long under such, uh, duress. Quite a respectable performance I’d say.
Mike.Re: Restraining plate for a Hotpoint 9524
Got at least two in stock. Not used one for about ten years. Can send you one for cost of postage, £2.75 first class. PM/e-mail if interested.
Mike.Re: Tecnik TKD 795/4 dishwasher Drain pump
Siemens, Bosch, they’re all the same aren’t they? Only slight doubt I have is that the part I gave you there is for 795/3 but it’s probs just the same. Have you seen the old pump? Does it look different from the one I gave you above?
Alternatively, I’d think the thing should have a proper Siemens e-nr on it somewhere. Espares.co.uk will show you (or the customer) where to look for that with specific instructions for Tecnik. With that you can search the Siemens e-shop which is like the Bosch one.
Mike.Re: Tecnik TKD 795/4 dishwasher Drain pump
If it is the Bosch then you need 423048 (TKD795/3).
Mpt do a pattn for £11.
If it’s a Whirlpool, then any old three screw job should fit; though check for toc.
Mike.Re: miele W715 washing machine pump
Connect used to do one but they’ve made it obsolete 🙁 .
Qualtex specify QUAPMP245 for this model which is about £140 less than the genuine 😀 .
Mike.Re: Ariston a1636 Washing Machine
Mpt special order too. Even at £14 I wouldn’t risk that without opening up the old one to check. Have never had one go. Would have thought EMW would have suggested it if it was likely. You sure it’s not just a dodgy knob, which has been pulled off then forced back on the wrong way? Or a loose connector somewhere?
Mike.Re: Connect
It does pay to shop around, there’s no doubt about that. I looked up price for an old style three tag Zan lock (FLS1183W) today. It was somewhere around £27 at big C but about £5/£6 at Mpt. and all over e-bay for about a tenner delivered. I suppose Connect is just so big they haven’t got time to worry about some of their prices being wildly out of synch. But it does mean you can come a real cropper if you don’t do your homework.
Mike.Re: AEG Lavamat 16830 dryer Problem
Yup. May not go o/c until it’s been running for 10 mins, then revert to OK on cooling. That’s what usually happens. I wonder if it’s the restricted water flow offering less cooling hence coil overheating.
Mike.Re: Zanussi 14850 Prod No 91460531200
rocker wrote: a cycle was running, there son turned machine off, since then machine has gone dead…
There was a rumour going round at some point that if you turned one off during spin it was enough to kill it.
Mike.Re: whirlpool 3ler5436eq1 commercial tumble dryer
Had to look them up on MPT first to get p/no.s The most difficult was finding rollers, desribed as, “trolley kit” 😕
Mike.
