Forum Replies Created
-
Posts
-
Re: Bosch SGS6962GB/13 Cycle Stuck on 1 Minute to go
JoeBloggs wrote:I’m pretty handy, so a loose procedure would be good to get me started 🙂
Sorry I cannot advise you further on that specific procedure, suffice to say though that it is a little tricky and really not a DIY fix and best left to us experts to call by and sort it for you. (see link below and, “Give us a click!”)
Re: Bosch Tumble Dryer
lingholm wrote:but he said there was nothing wrong with it – BOSCH WERE NOISY.
Oh that’s a good ‘get out of jail’ excuse I guess, but more likely the noise was a loose or broken fan blade?
I’m not sure if a WTL6003 is actually made by Bosch or whether it’s a ‘re-badged’ make from another manufacturer though? (As there are several models in the Bosch range I guess this one is at the bottom end)
Usually Bosch dryers (mid-range) are excellent 😉
Re: Bosch SGS6962GB/13 Cycle Stuck on 1 Minute to go
JoeBloggs wrote:I take it the Part change means the old parts were upgraded ?,,, Were the oroginal parts badly designed ? Should I change them out to the new parts ?
Just a part number change that’s all, you don’t need them anyway!
Also, I’m not sure if you read my last post on the previous page?
Re: Bosch SGS6962GB/13 Cycle Stuck on 1 Minute to go
JoeBloggs wrote:Could it be a fualty PCB or is it more likely to be a mechanical/sensor issue?
I doubt the PCB is at fault here but the latter could be the issue?
Basically at some stage during the cycle your machine is ‘timing-out’ from it’s intended sequence. So of all the things you have cleaned and checked it only leaves me with two thoughts. Firstly, are you sure the drain coupling to your sink is clear and free flowing?
Secondly, it could be a crudded up instanteneous water heater unit soil sensor? (Access to that involves removing the tub first though 🙁 )
Re: creda 37771 tumble dryer
wicker wrote:does anyone know how to change the door hinge on a creda 37771 tumble drier?
Yes indeed, the old one simply unscrews from the cabinet and door unit, reassemble in reverse order 😉
What problem have you encountered then I wonder?
Re: Hotpoint WM73 Instructions
Here you go Cooky :-
http://www.theservicecentre.co.uk/Service/inst.htmlRe: Hopoint W/D 64 Dryer TOC
alfie wrote:I’m missing something ?
Yes, the condenser unit needs taking off the back and cleaning out! 😉
Re: cooker repair
Contact the manufacturers OR their agents and find out what is being done, why the delay etc etc?
The supplier has a responsibilty for your product and you should contact them and complain also!
Re: Dishwasher Detergents
gdownes wrote:The current presentations by UKW now include a section on dishwasher detergent technology
Stick tablet in dispenser, shut door and turn on!
Or are you saying its more complex than that 😕
Re: Ariston AWD 12 noise when drying
Deepwaters5 wrote:One more question.
Anything stuck in the filter that shouldn’t be there has to be dealt with as soon as possible as it can radically effect the operation of the entire appliance. ❗
Re: Best electrical supplier
