Forum Replies Created
-
AuthorPosts
-
Martin
ParticipantRe: Bosch SKT5102gb/01 Impeller removal
My pleasure 🙂
Martin
ParticipantRe: Washing Machine: Miele Vs AEG?
The Miele WDA210 has all the features you would ever need and comes with a 10 year warranty.
Martin
ParticipantRe: I really must not take advantage of customers…
So at what stage will we see junk piles of BER heat pump dryers stacked alongside fridges at the recycling plants?
Martin
ParticipantRe: New Bosch dishwasher drain pump runs continuouosly
The machine is faulty and insist Currys replace it forthwith…!
Martin
ParticipantDissertation Survey, Domestic Appliance
It IS aimed at the general public, in a public forum and for the public to fill out.
Martin
ParticipantRe: Hotpoint WML720PUK.R motor issue
New motor.
Martin
ParticipantRe: I really must not take advantage of customers…
What was the difference in time taken?
Martin
ParticipantRe: Zanussi washer-drier won’t take down conditiona.
You omitted one vital bit of info….model number?
Usually both cold valves are energised and the opposing flow enters the conditioner channel. No diverter valve just water flowing together….simples!
March 30, 2015 at 2:00 pm in reply to: IGNIS washer suddenly doesn’t work… as silent as the grave #425926Martin
ParticipantRe: IGNIS washer suddenly doesn’t work… as silent as the g
Bosch still hold out as the best but mid range, not the cheap end.
Martin
ParticipantRe: Hoover Nextra
New door interlock should be OK.
March 30, 2015 at 6:53 am in reply to: Bosch won’t move past wash cycle and I’ve tried the obvious. #426104Martin
ParticipantRe: Bosch won’t move past wash cycle and I’ve tried the obvi
Heater relay on main board then?
Martin
ParticipantRe: Siemens WasherDryer WDI 1440
No, just the seal clamp ring from the front panel.
Martin
ParticipantBosch SKT5102gb/01 Impeller removal
I’m not familiar with the model but to release the Impellor it will need to be turned clockwise as its ‘left hand threaded’ on the shaft.
Martin
ParticipantRe: Bearing problem on Bosch WAQ28461NL Avantixx 7?
Hmmm? Sounds to me the drum unit needs replacing under guarantee. Faulty hub in tub moulding causing bearing ‘chatter’ at certain revs.
March 27, 2015 at 8:42 pm in reply to: IGNIS washer suddenly doesn’t work… as silent as the grave #425923Martin
ParticipantRe: IGNIS washer suddenly doesn’t work… as silent as the g
Power unplugged first then you can check the on/off push button switch for starters. How much electrical knowledge do you have?
-
AuthorPosts
