Forum Replies Created
-
Posts
-
Re: Bosch WAK28260GB/11 motor bearings shot
2 yrs 10 months? Do you think that not an unreasonable lifespan for a motor then? How many wash cycles has it done? 3,000 maybe 4,000 in that time?
Re: Siemens turns itself off
OK well I thought it could be that the magnet door lock (aka hall sensor) may just be sending the wrong signal to the electronics hence the odd behaviour. Just a thought that’s all. 😕
Re: Siemens turns itself off
It might be associated with the magnetic door switch engaging and disengaging? Is it stood on an uneven floor?
Re: SPEED HUMPS — AHHHHH
Fear ye not for Michael Gove is on your case…..
Re: AEG T75280AE dryer
The manual makes no reference to EH0. There is an EHD which indicates a main board fault ‘Current leakage of any actuator’ (whatever that means :rolls: )
Any error starting EH? refers to a board fault of some kind.
Further info? The do give us the FULL PNC 😉
Re: Bosch wfd2471 leaking
A silicone bung or better still Steel Putty would sort it. Though I have no clue what that hole is about. And as mentioned earlier, nothing shows up on the parts drawing. 🙁
Re: Family washing machine
Beko would be a perfect choice. No frills, does the job, good for 5 + yrs, no great capital outlay, sorted!
Re: Hotpoint dryer starts when off,
I doubt a squirt of switch cleaner would have any effect but is sounds like contact is made intermittently with adjacent programs in that off position. But worth a try I suppose before changing the board. 🙁
Re: Really loud spinning noise
jonnyw wrote:I’d hate to send something that can be economically fixed to landfill.
Relax Jonny, have no fear, for it will be stripped of all its constituent parts. All of which will be recycled to make pedal bins, traffic cones and cavity wall insulation. 🙂
Re: Hotpoint dryer starts when off,
Nothing wrong with the knob then, no spillages behind it or some such?
Re: wkd28350gb/03 bosch w/d
I know you checked the airflow but did you actually lift the blower fan to see if the vanes are clear?
Fluff block in bottom corrugated hose?
Customer switching it off before the end of the dry cycle maybe?
Re: Neff dishwasher S41E50SOGB
Aberdeenloon wrote: it clears remaining water immediately when on a 15 min rinse cycle
Forget the outlet system as that must be clear then. The drain pump must be worn and reacts badly to HOT water, I reckon.
Re: IS THIS NORMAL?
The bottom left and bottom right pins do look as though they’ve overheated. Probably looks pretty burnt on the track side too?
Re: OKO-lavamat 61300
Or, the black rubber sump hose pipe that runs to the air pressure chamber is blocked with the dreaded ‘gunge’. 😕
