Forum Replies Created
-
Posts
-
Re: Bosch oven – oven function keeps switching on grill inst
It does sound a bit like the selector switch (part no: 00611030) needs replacing.
Re: New AEGs (Polish) are lighter, shallower than old (Itali
tedwards101 wrote:I beg to differ on the origin of the model you quote above. It is made in Italy (Porcia factory).
Well spotted Ted, yes it is made exclusively at their Porcia factory 😀
Re: bosch diswasher sgs53c12uk
What have you checked so far? I’m thinking either mains filter or heater ❓
Re: Bosch WAQ28461 grinding/rattling noise
There is something rubbing against the pump impeller. (A foreign object like a hairgrip or some such). Drain the filter as per user instructions and remove the filter. Check, with a torch, to see what’s in there, once the filter is removed?
Re: Logik L612WM13 – loud drum
robhaines wrote:thanks everyone 🙂
Do let us know what machine you replaced it with Rob. 😀
Re: New AEGs (Polish) are lighter, shallower than old (Itali
Lighter one piece sealed polycarbonate drums. Thinner grade metal cabinets with ribbed reinforced sides. Plastic moulded control panels (formerly metal). Alloys replaced by plastic. Smaller concrete counterbalance weights. Lighter induction drive motors. Condenser units smaller and thinner. Fan motor units smaller, lighter.
Weight saving a massive priority in modern mass produced factories targeting a world market.
Re: AEG OKO Lavamat 6950 on last legs?
The black rubber sump hose could well be blocked especially the section of pipe that leads to the pressure switch.
The motor needs attention as the brushes will almost certainly need replacing.
And finally, and if the pump is OK as you suggest, then the drain hose and where it terminates need inspecting too.
Re: Zanussi zwgb7160p problem
Good plan! Especially if one brush tip is blackened and no longer shiny.
Re: Indesit washer motor problem
The motor is controlled by the module so yes it’s top on the list of suspects. Costly repair this ones gonna be 🙁
Re: Bosch tumble dryer shuts off
Is it getting hot in the 10 mins it runs?
The front sensor (00154166) may need replacing if it does.
