Forum Replies Created
-
AuthorPosts
-
Martin
ParticipantRe: Neff U1451N0GB Fan Element (New) Not Heating
thelearner wrote:Different sized spade connectors at each side of the element would also make it foolproof.
…..and more susceptible to overheating and burning out.
Martin
ParticipantRe: Hotpoint WF860P Drum not turning.
Motor not turning eh? Best you check out the motor. Maybe it’s brushes are worn?
Martin
ParticipantRe: ewg14440w electrolux e41 error code
Maybe not but I will keep my fingers crossed on that one. Do let us know the outcome 😀
Martin
ParticipantRe: Top Trumps
My husband’s had a go and can’t fathom it!
The ‘other’ company has let us down.
Let us know what time and my neighbour will let you in.
My friend said you don’t charge to come and look.
I get home just after 7pm every weekday evening.
You said it had a 10 year guarantee.
The key is under the mat, ignore the dog.Martin
ParticipantRe: Bosch classixx maxx diswasher
Ah! Thanks for the further detail. You need to replace the impellor jug.
Martin
ParticipantRe: ewg14440w electrolux e41 error code
iamhayley wrote:But yes one of the little boxes is all black? Does it need new boxes and wiring?
The best cure is to replace the harness (part no: 132 52 31-00/7) which connects the interlock with the main board. It includes the connector blocks and simply plugs into the interlock.
Martin
ParticipantRe: HOW FAR WOULD YOU WALK TO A JOB
What a tale of woe there…..less than 2 months into the year and you’ve racked up those stats…wow! I don’t do contract stuff so if I can’t park outside it’s a no for me.
Martin
ParticipantRe: Bosch classixx maxx diswasher
Few thoughts: Drain pump worn and sticking. Impellor Jug or the PCB ???
Martin
ParticipantRe: Bosch classixx maxx diswasher
…..and the model number (ENr) is ????
Martin
ParticipantRe: Bosch 1401 rock ‘n roll
The pivot mounts of the shockers wear too don’t forget. The effect is the drum flops about front and back like the proverbial ‘p’ in a bucket. 😉
Martin
ParticipantRe: Error code E69 Zanussi zwd14270w1
Jack00 wrote:My washing machine is not drying my clothes. E69 is a drying error code, any ideas on faults?
News to me, the service manual refers to the water heater that is powered from J6 on the dryer board. 😕
Martin
ParticipantRe: Error code E69 Zanussi zwd14270w1
Are you checking the right heating element? The fault code refers to the water heater NOT the dryer heater.
Martin
ParticipantRe: Bosch 1401 rock ‘n roll
Your WFF1401GB/01 has to have knackered shockers (the LH one usually the worst affected) for such extreme movement and they need replacing. All 3 top springs are in position are they? Final questions: Is the motor running OK, brushes OK?
Martin
ParticipantRe: Siemens IQ500 washer dryer cooling tank
Siemens call it a Cooling tank but in the trade it is generally referred to as the condenser. Yes you need to lift off the fan unit and clear that fluff and gunge.
Martin
ParticipantRe: Bosch/Neff dishwasher heat pumps
These tales of woe are commonplace and suffered by many. If you use the ‘Search’ box and type heat pump a whole raft of moans and groans are to be seen spanning recent years. Changing these is a risky business as so many factors can come into play once the repair is completed and paid for by the customer. Usage, water leaks in the base, sluggish pumps, water starvation and excess voltage can all lead to premature failure. Giving a 1 year service guarantee and the pain truly kicks in as many only last months as the testamonies show. Bosch, Siemens and Neff dishwashers are a serious financial risk to the sole trader so don’t even think of doing work on the cheap on these heaps of pooh. 🙁
-
AuthorPosts
