Forum Replies Created
-
Posts
-
Re: Siemans Auto WM12E468 F21 Fault Won’t Reset – Help!!
That’s not the correct procedure i think . Try selector switch to off. Turn selector switch to 6 o’clock , hold down spin speed button and turn selector switch one position clock wise. Release spin speed button and then return switch selector to off.
Re: Bosch WTE84307GB/08
2 possible causes that i have seen. The main pcb failing is one. The second is the mains socket….which I’ve seen more than once. Ask them to plug it into another socket to see if the fault disappears. If not, then I’d certainly be thinking pcb.
Re: Siemens wm12e468gb/07 error f21
Martin wrote:
bmrenr wrote:
Thanks again Martin I had tried that so many times yesterday but It never worked I called back today and it worked the second time. I must have been doing something wrong.You have to do it gently. It’s a washing machine and in German that is a feminine word waschmachinen and in order to get a response then slowly is the way to do it. :clown:
…..and it never listens to you on the first time either 🙂
Re: bosch wvt12842gb
Try to start it with the door open and see if it acts the same. If it does, 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it’ll be the door lock.
Re: Neff S41E50B0GB/01 Dishwasher Stops in cycle
Could it be E.09 maybe as opposed to 9 minutes? Could be no heating fault?
Re: WVD24460GB02 stops with random time remaining
Have you checked to see if there are any error codes stored?
Re: Bosch WVD2452SGB/01 steam from dispenser.
The modified ‘hose’ between the small condenser box and the dispenser has a slightly different depth and shape to the original but not so’s much as it’s obvious. If the valves are operating correctly and the condenser is clear I’d say it’s worth a shot replacing it.
Re: Bosch WAP28360GB
Definitely the motor module. When it fails in this manner , the error code when accessed will point towards a tight drum or something jammed between tub and drum…..hence the way the drum jerks as it tries to spin.
Re: Neff S51E50X1GB/03
There is a sealing strip that can be inserted into the gap but it has to go in in a particular way. If the strip is there but just appears hooked over , it needs to be folded’ and squeezed in between the tub and base. ‘
Re: siemens sn26m290gb07 dishwasher e24
A blocked/stiff heat pump or loose drain pump access cover can also cause e24
Re: Bosch condenser WTE84307 GB/13
Normally the pcb but had one where it was the customers socket playing up !
Re: Bosch Washer Dryer WVD24460GB/02
It sounds as if you’ve got a blocked condensor box , normally down where the box joins the tub. Its probably going into an overheat state when drying
Re: neff c7660N1GB/04 leaking water
We just get them picked up and sent to the workshop so can’t really help.
Re: Siemens WK14D320GB/01 washer drier E13
As Martin says , low insulation on dryer element OR faulty control module .
