[Seamy]

Re: ZANUZZI ZWF1632W WASHING MACHINE

Syphoning?

[Seamy]

Re: AEG Lavamat 610 PCB blown tracks

Yeah they will cost both arms & both legs if you need to pay for spares. Like £80 for a door gasket, £400 for a motor or £300 for a p.c.b.

[Seamy]

Re: beko wma510w

If its found to be not syphoning, the NTC could be at fault

[Seamy]

Re: new add campaign by D & G

Sounds like the Mastercare tagline

[Seamy]

Re: Changeing eproms

Is it an Indes4it or what type of appliance are we talking about? I personally wouldn’t bother unless they were the plug in type eeprom.

[Seamy]

Re: built in electric aeg oven door hinge

Sometimes there is a sticker on the outside of appliance on back or side.

[Seamy]

Re: Zanussi ZI 920/8 FF : pulsing noise

Sounds like the defrost timer operating, if its doing it continuously it may be stuck. Sometimes turning it one nick with a flat blade screwdriver will solve the problem.
50213960-00/3 is the part number if its found to be faulty.

[Seamy]

Re: Zanussi ZWF 1012W. Error light runs from left to right ?

Sounds as it may be in either “demo” or “diagnostics” mode. Try switching it off & on twice to see if it comes ok again.

[Seamy]

Re: zanussi di 460 d washer

Door interlock may not adjusted correctly or hinges could be damaged, get a few of these after kids stand on door when its down in open position, this twists the door & can cause problem described.

[Seamy]

Re: AEG Oko Lavamat 610 – broken programme selecter knob

Have you tried A.E.G website? Enter PNC number & search.

[Seamy]

Re: RANGEMASTER CLASSIC 110 COOKER

Yeah could be caused by a earth leakage, some of these cookers now have direct live cable to element & neutral is switched, this can cause problems with certain supply types and/or if house wiring is suspect.

[Seamy]

Re: Tricity SB431 cooker

post pnc number of machine & your e-mail address & some will be able to help

[Seamy]

Re: new bosch site, how do you find parts now??.

Can you use this

https://www.bosch-eshop.com/eshop(bD1lbiZjPTAwOQ==)/bosch/gb/indexs.htm?Refresh=Y

[Seamy]

Re: Zanussi zwf16581w Permantly draining

Go into diagnostics, fill to level, empty/drain. This normally resets them.

[Seamy]

Re: Late zanussi washer with sealed drum

Have turened machines upside down to dislodge items like this, sometimes you can get in through heater aperture or take out drum lifter out to get at these. If it has its damage done its a tub replacement though.

[Author]

Posts