Forum Replies Created
-
Posts
-
Re: bosch dishwasher problems
yeah i dont really understand myself,
the circulation pump sprays through the heater box, in the assembly is an old timer style motor which turns a 3 inch disc which has 2 holes in it a big hole and a small hole it is to give different spraying. the disc can stick and depending where it sticks will cause a problem.
the fix is replace assembly or my personal favourite strip it down and remove disc, throw it away then it wont stick again.
i am ready for critiscm from bosch fans.Re: bosch dishwasher problems
it could be a model with the silly motorised cam with a big hole and a small hole, if the motor stops turning it depends if a hole is lining up with the spray arms.
Re: siemens wm14s493gb/03
hi,
thanks for the reply checked the connector going to the interlock,
dont know about the volume but i am going to order a door lock and give it a try!
thanks again.Re: Indesit washing machine explodes
what happens if we have to take a sock out of the pump one day and the machine blows up the next who is going to get the blame.
i fitted a pcb to one of these and the shaft broke on it the next week fortunately without any major damage.appleelectrics wrote:I Keep telling himself that i am working stupidly long hours to make a better life for my family, yet working those hours is keeping me away from my family, how does that work?
that is scary i have been thinking that all day.
got an absolute earful from an old codgers daughter because i told the old biddy there was sod all wrong with her washing machine 2 days in a row.ive switched the bloody phone off i am fed up with people phoning at half past nine asking “How much is it to fix my machine i dont know what kind i dont know whats wrong i dont know when i am in i dont know my phone no. i dont know my partners name.”
Re: diplomat dishwasher
shugee your dishwaser is probably not heating you would be best getting an engineer out.
drumstick if you take the bottom front panel off you will probably fing the base of the machine has water in it, plug out first.
Re: Hoover HDC6 Dryer Start problem (not Relay PCB!)
i have replaced several of these pcbs and never had one fail,
it can only be the pcb that is faulty, the part you we sold must have been faulty or not new.Re: white knight dryer 76aw
ok i will try another heater in and see what happens,
it wa a pattern heater from qualtex.
thanks for the reply.
in fact it was actually a gen part.Re: Electrolux Inspire EDC 77570W error code 50
e50 motor fault,how new is just about new.
you say you have only used it 15 times mine is on more than that every month.
check the brushes.Re: zanussi tc-481w tumble drier belt problem
the pulley goes on the outside of the belt the non grooved part, the spring pulls the motor and the pulley against the belt tightening it up.
Re: Bosch Washing Machine ignores fabric conditioner
the holes in the top of the dispenser wil be blocked.
