[suedehead1]

Re: Washer takes water and then pump out

is that a haier?

[suedehead1]

Re: Hoover VHD 8142 wrong cycles

the preselector timer is faulty its not resettable no amount of button pressing will fix it call hoover,
when you set it to 29 mins the selector is telling the machine you have selected a different program, it needs a new part, dont touch it or you can invalidate your warranty.

[suedehead1]

Re: (another) indesit d41 dishywasher

welcome to the trade section dont you have an old board kicking about?
its the pcb there not too expensive but check you ge the right on as there are quite a few different ones.

[suedehead1]

Re: hotpoint wma42p control pcb interchangeability

and you have just informed any potential customers that you use old parts.

[suedehead1]

Re: indesit is60v

maybe if you say why you need the wiring diagram you my appeal to someones better nature, failing that call indesit.

[suedehead1]

Re: Bosch tripping out mains

its easy to replace but you need a meter to tell wether it is faulty or not, although it may be visibly faulty.

[suedehead1]

Re: Bosch tripping out mains

most likely to be the suppressor (worth fixing) not the sockets,
plug out if checking,

[suedehead1]

Re: whirlpool awg345/4

any ideas please.

[suedehead1]

Re: Hotpoint WMA36

taco or pcb

[suedehead1]

Re: indesit wd12x

thanks very much just what i needed.

[suedehead1]

Re: hoover hnwl7146 washer dryer

tried it both on timed setting and sensor drying and it is the same on both.

[suedehead1]

Re: samsung p1453

its a board fault dont know if emw fix them.

[suedehead1]

Re: aeg dishwasher

just used a small pair of vice grips.

[suedehead1]

Re: aeg dishwasher

thanks chris it was the y shape rubber hose connected to the heater, got it changed by taking the side of and the lower rear panel.

[suedehead1]

Re: hoover nextra help

faulty door lock?
plug out first.

[Author]

Posts