[suedehead1]

Re: Hotpoint WM on/off button

connect are showing stock 5031683262077

[suedehead1]

Re: Hooer HNV380 whining and

spray wd 40 onto the motor and look out your fire insurance policy stand back and wonder why you didnt pay £10 for pulley wheels.

[suedehead1]

Re: no work

in my local newspaper i have 2 new advertisers both claiming £10 off with this advert, do they think the public are stupid or are they desperate.
i am a no call out free estimate type much maligned on this site but this really is a surprising development.

[suedehead1]

Re: bosch sgs45e08gb/45

i will give tony a call in the morning i usually get qer to fix these for me mut their success rate is poor.

[suedehead1]

Re: hoover ac125 w/m

heater or suppressors are most likely to cause tripping on this machine.

[suedehead1]

Re: beko cooker

johnrobertsonyoung@hotmail.com
sorry i typed the wrong address.

[suedehead1]

Re: beko cooker

it is single cavity there is no door switch.but thanks for the reply,

[suedehead1]

Re: beko cooker

i am not sure about the polarity either but it has no auto or timer facility is very basic.

[suedehead1]

Re: Candy CMD 146 – Powers up but wont run programme

why would you pay someone £104 for parts and labour when candy will fix it for £109 ok you save a fiver but you get it fixed regardless of the fault and its guaranteed.

[suedehead1]

Re: Candy CMD 146 – Powers up but wont run programme

the machine is under a 5 year parts guarantee ie. candy wil fix it for £109.
free parts and by the way its the pcb plug out if checking.

[suedehead1]

Re: Hotpoint CTD85 tripping.

i thought i would resurect this post i have had recurring problems with a ctd 85 water is getting into the rear fan and t gets thrown up onto the element and it trips.

i have cleaned the condenser pushed a cable tie down the channel at the back of the condenser and changed the pump but it still does it.

there seems to be water lying in the channel at the back of the condenser which does not drain down into the pump chamber even though i have pushed a cable tie down the hole the water does not drain down.

any ideas welcome.

[suedehead1]

Re: indesit widl126 constantly filling emptying

its the pcb

[suedehead1]

Re: Diplomat APM8522 drive belt damaged wiring

they are not that bad and surely must be worth the price of a belt, these belts are elasticated and are common to disintegrate.
i would have no worry whatsoever about changing a belt on a servis i have done dozens and nevr heard another thing about them.

[suedehead1]

Re: indesit wa 155 still not sorted

stick i on and give it a try find a belt that fits it, check the wires in the plug go to the same parts of the motor.

[suedehead1]

Re: Indesit WIL163S acting strange

migt not be the pcb could be a water valve or heater plug out if you are checking but it would be better getting out an engineer from repairs@.

[Author]

Posts