[suedehead1]

Re: Indesit DI620 dishwasher

thanks again i still have the old pcb i will stick it back in and try again regards sh1.

[suedehead1]

Re: Indesit DI620 dishwasher

thanks for the reply i did try and hold in the start button for a long period if time i will go back and have another go i am starting to thing the pcb i got from qualtex may already have been fitted before, i think my only option may be to get another pcb.

[suedehead1]

Re: bosch dishwasher timer

its pre engraved door type i checked but thanks for the reply

[suedehead1]

Re: fagor

thanks for the reply,

i dont deal with them but i will give them a phone in the morning,

[suedehead1]

Re: diplomat adp3230

thanks any approx prices, i see the grill element in shop@.

[suedehead1]

Re: Miele tumble dryer will not start

I didnt change the door lock i stripped it down and replaced the microswitch – watch, it is an off/on switch instead of an on/off switch.

[suedehead1]

Re: servis m6702

thanks for the replies called out the machine was not faulty again, customers!!!!!

[suedehead1]

Re: Miele tumble dryer will not start

i fixed one today exactly the same light on, it was the door lock

[suedehead1]

Re: servis m6702

thanks for the reply.

i thought it was the module but i fitted a brand new module and the fault has reoccured, unless something has damaged the pcb.

[suedehead1]

Re: BOSCH CLASSIXX 1000 EXPRESS query

hi,
have you checked the hoses at the back of the machine and the filter is in tight?
the only thing which will leak after the machine is finished is the fill hoses or the pump.
plug out before checking.

[suedehead1]

Re: baumatic dishwasher bdw 13

hi, the pink wire goes to the heater, so i will try the brown to the acl and white to the acn thanks for the help.

[suedehead1]

Re: Diplomat ADP8242 – Just wont stop…

hi,
it sounds like a circuit board fault, not really a diy job,as far as replacing it i would be more likely to repair it if its integrated because of the hassle to replace it.
suggest click on repairs@ link for an engineer.
if you do have a look yourself take the plug out.

[suedehead1]

Re: hotpoint twin tub tripod kit

i have just ordered 2 on line thanks very much,
you would have thought that someone would be making them even pattern spares.
thanks again.

[suedehead1]

Re: Servis M9813 Washer/Dryer…

give it a good spray with wd40 it might prolong its life a bit.

[suedehead1]

Re: Servis fills up with too much water and leaks from dispe

the thin tube which goes to the pressure switch.

[Author]

Posts