Forum Replies Created
-
Posts
-
Re: Hotpoint TVEM70C vented dryer
Done a few of late. Just whacked the old shaft off. Its luck if you leave any sharp edges though. I just used the parts that come with the version 4 drum kit. Pads included.
Re: BOSCH SMS 50E02UK/01 strange fault
A bit of a long shot… have you tried plugging it into a different socket. You can get weird faults like this with iffy points.
Re: Stumbled across this whilst looking for fridge training
A couple of years ago there was talk of Ian Dales sorting training in conjunction with the WTA. I enquired a few times but never did hear the outcome. I’m wanting to do a refrigeration course but its the locality of it more than the cost. Any news…
Re: CD601w cutting out.
I would ask her to try it on the low heat. I’ve got one of these that works fine on low settings but cuts out on the high.
Re: IDL-500 – Control Board 4303 303 3240.6 – Dry Joints
You do have to be careful though as this range of boards have been known to catch fire.
Re: indesit iwdc6105
I’m sure I had this a few months ago. The new lock now listed was the same as fitted on the old WMA range.
Hand one in the van, held my breath and all was fine.Re: Bosch WAE24367GB/34
If timings ok on rinse cycle & spin cycle then I would be checking the heater & wiring to heater.
Re: Dishwasher rust hole repair?
There is a possibility they didn’t want to risk such a repair due to the fact if it didn’t work they would be held responsible. Just a thought…
(Similar argument to whether a heater relay can be safely re-soldered).Re: Siemens SN25M230UK/01 heater.
You may find there is a supply but needs the resistance of the part, heater in this instance, for it to show?
Re: Risk of buying stock from a retailer like J/L or Currys?
Im stuck
I think you are giving it far too much time. Tell him a price & let him decide. That’s it. You call the shots!!
Re: HOTPOINT DRYER VTD00G 95313310000
Some models have an extra timer in the base of the dryer as well as the normal minute timer.
