wilf

Forum Replies Created

Viewing 15 posts - 436 through 450 (of 737 total)
  • Author
    Posts
  • in reply to: neff oven #247103
    wilf
    Participant

    Re: neff oven

    yes white and red to either side of the element plus a green and white on with one of the red whites I always make sure not to mix up by putting a cable tie around the pair

    wilf

    in reply to: Zannussi fjs1225w not starting #247005
    wilf
    Participant

    Re: Zannussi fjs1225w not starting

    pump o/c?

    wilf

    in reply to: pat test help #246016
    wilf
    Participant

    Re: pat test help

    if it weighs more than 40kg and can be moved then techniaclly its “transportable” but dont ask me what difference this makes to any test

    wilf

    in reply to: cheek! #245892
    wilf
    Participant

    Re: cheek!

    as I said I do lots for diffrent agents with little problems and its a good earner. I thought it might help to put us all on our guard. as I said with the general property market slowdown and loss of earnings from sales some of the “sharper” agents might be looking to increase there profits from other areas.
    dont think I didnt let them know what I thought. did get another call from them today and guess what……………………..?

    wilf 😉

    in reply to: cheek! #245884
    wilf
    Participant

    Re: cheek!

    well do I say no xxxx off, or take any more offered and add “MY” 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} and try to claw back my losses ?
    I would advise anyone else to be aware of this. if one agent has started and gets away with it this it might soon snowball particulally as the economy starts to slow down

    watch this space!

    wilf

    in reply to: A1436 Ariston Dodgy Cold Fill Valve Assy #244237
    wilf
    Participant

    Re: A1436 Ariston Dodgy Cold Fill Valve Assy

    I had one just dribbeling. looks like the customer was lucky

    wilf

    in reply to: CREDA T/D TVR 2 #243635
    wilf
    Participant

    Re: CREDA T/D TVR 2

    if the customer has had a go at it I should check the wiring

    wilf

    in reply to: hoover hc6 150m #243527
    wilf
    Participant

    Re: hoover hc6 150m

    thanks I’ll try the timer first

    wilf

    in reply to: Bosch Tumble dryer #243362
    wilf
    Participant

    Re: Bosch Tumble dryer

    if its an intermittant fault I’d try the 60 deg stat first

    wilf

    in reply to: Zanussi start button #241803
    wilf
    Participant

    Re: Zanussi start button

    check that the start button is actually working i.e. the board and button are makihg contact like the fault you sometimes get on the zanussi dryer where the diffiser breaks and the button fails to contact the switch

    wilf

    in reply to: Hotpoint wf540 spin direction #240921
    wilf
    Participant

    Re: Hotpoint wf540 spin direction

    the down side to this is that you have to hang corks on your hat before you fix it 😆

    wilf

    in reply to: Hotpoint wf540 spin direction #240919
    wilf
    Participant

    Re: Hotpoint wf540 spin direction

    must be an australian one 😆

    wilf

    in reply to: Hugh’s chicken run #239235
    wilf
    Participant

    Re: Hugh’s chicken run

    keep your own birds its easy. plenty of eggs and a fat fox!!!!!!!!!!!!

    wilf

    in reply to: Creda S150LB No live to main oven element. #239765
    wilf
    Participant

    Re: Creda S150LB No live to main oven element.

    turn the switch upside down and you might see a metal clip linking two terminals. it caught me out ,an old rewireable fuse wasnt fast enough to stop the surge blowing this link when the element blew. customer now has MCB’s fitted.

    wilf

    in reply to: indesit w/m bearings #239358
    wilf
    Participant

    Re: indesit w/m bearings

    I’ve got an impact driver, seems to work on that stupid pulley bolt.

    wilf

Viewing 15 posts - 436 through 450 (of 737 total)