Forum Replies Created
-
Posts
-
Re: Smeg SUK62MFX fan oven motor. Obsolete?
yes its:
795210620 & 039290121 & 902610342
the other 2 numbers are the fan and nut. needed as a kit for some reason although most I do seem identical to the old ones.Re: SMEG DWF614SS Diverter Valve
bzz67 wrote:From memory (which isn’t great), i think it is in a hose at bottom front. it has a flap in there that opens and closes, may just be sticking.
too true about the memory! 😥 ( I know the feeling though!)
its at the back, centre, just next to the circ pump and fed from a hose from it, circular. 2 hoses and the 3rd water connection is direct into the sump under the lower spray arm. common failure. Have to repalce as its usually a leak from it that starts the problem. only retained by 2 screws and the hoses so an easy fix. (tip machine on side after first emptying the remains in the sump and the regen reservoir) You dont get the 3 o ring seals with the new one so you need to remove these and fit them back on the new one. 819130468Re: diplomat intigrated w dryer
model number would help….
if its the merloni type it has to be one of the easiest backplate jobs going.Re: Flybe “airside” installs
sorry, thought you were referring to this thread, nevermind interesting subject, do they have any water pressure on a plane? did they ever get fitted?
Re: Flybe “airside” installs
johnmac11 wrote:I have had a similar approach in the past and had to decline. My insurer nearly took a fit when I told him the installs/ repairs would be on aircraft, can you imagine what damage a leak at 33,000 ft could do 😆
John
John, I would assume that these are not actually ON an aircraft 😉
Re: Flybe “airside” installs
IME van nowhere near site, have to go through terminal security with a tool bag full of dangerous items, then same proceedure again if you need to get something from your van, parked a bus ride away. Would need a high rate to cover the time and hassle. oh yeah and passport nessesary too!
Re: Siemens/Bosch dishwasher motor.
convert it to cap start, its easy used to do loads when this was a common machine, even a hole ready for a cap in the back of the machine.
oops, probably too late, sorry for not replying sooner!Re: AEG 86800 washing machine dead!
you really need the Pnc or Enr number for these starts with 914…….
Re: DI612C dishwasher clicking, beeping, and juddering
assuming its a SMeg, try the dispenser solonoid itself.
Re: smeg d/w di612c
keithwilliams wrote:try removing the lower front panel so that you can look inside. after removing the leaked water put it on a cycle and watch inside towards the right side.
i’m not sure if your model is the same but i have a customer with 12 integrated smeg dishies (poor sod. although i have one too) any way over the past six months three of them have started leaking in the right side panel. this is fitted to the lower unit by o rings. on all three the leak was right there. dead easy to fix with a thicker ring and to make sure a generous helping of debor around it.hope this helps
true and a common leak spot, but not related to the original post and best fixed by adding a second o ring to the originals.
The original post said it overfills and trips the anti flood rather than the drip tray float. Its definatly the PCB, done loads-they just ignore the pressure switch for whatever reason, who knows. Best part is, you dont have to pull the machine out to fix….bad news is the price. 816290840 £112.80 retail.
