Forum Replies Created
-
Posts
-
Re: Smeg PL426X integrated D/W motor
usually a rusted thread on rotor, complete pump is the only repair if so. Right old knacker that one, give it up is the best suggestion.
Re: Hotpoint WMTL79
cannot imaginme why that is so expensive….52 also at Qualtex but its a special order. retail is shown at £69 so depending on discount rate, Indesit are the cheapest.
Re: Hotpoint one shot too far!
I would really like to meet the designer who attatched that toc from INSIDE the heater box…. 😈
Re: Hotpoint WF 840 hot fill prob.
now if you had a hardware key…..eh Martin?
Would imagine it takes in hot only on the 90 cotton wash maybe?
Re: Indesit Test Tool
Quick question…is the Low end adaptor sold for the smart card re programmer the same as the low end adaptor used with the hardware key? They look identical but have different part numbers.
Re: regassing fridge/freezers
Have a look at this lot:
http://coolconcerns.co.uk/index.phpas with most refrigeration training its all geared toward the commercial market. I did their course many years ago and found it helpful and informative.
Think before you plunge in though as unless you are doing work for an insurer then re gasses are pretty rare and you would never probably cover your costs.Re: MFI Turmoil
Anyone else got a demand for payment from the admistrators today? talk about rubbing salt into the wound…..
Re: Hotpoint DF53 heater toc problem.
It is a DF53-Brandt produced and uses a washing machine style flat element. A lot of scaling and grunge keeps water away from the thermostat causing it to trip off by the heat from the element..
Re: DIPLOMAT AHY 4310 BUILT IN OVEN
If you meant the energy regulator its: OROTCTLA
If you mean the small oven thermostat its OTHERMRe: How low can they go?
Miele new applinaces have a price hike this week…the second in a month or so.
