Forum Replies Created
-
Posts
-
Re: Smeg CR5050A
cannot remember it exactly but I am sure it is only held on the usual ways, screw under stat knob maybe?
Re: Bosch dishwasher SGS43A12GB/27
Have a similar problem here, got one only feeding the top spray arm. Replaced heater and still the same. Customer NOW tells me Bosch has visited recently and replaced the module, Including the Sycasism (whatever) wiring mod as noted above and the problem has started since them. It has been coded to “20” and all the buttons seem to work in the correct position but the coding sheet I have got does not mention specific coding for the alternating valve. Have spent hours on this and got absolutly nowhere. Thinking of taking a L and N feed direct off the circ pump to the alternating valve motor as a possilbe solution. My one is a model SGI5342GB01 FD8111 and the correct module is 489607 but cannot confirm if this is the one Bosch, or whoever did the work, have fitted. Would be interested if you can dig up anyinfo on this one Martin.
Re: pestering customer
looks very familiar, but not with a Servis badge on it (which looks like its just been stuck on recently anyway) If its a Bendix then the air bell will be blocked and subsequntly the heater blown. Barge pole job IMO.
Re: Card Terminals
just like to add I have recently been updated to a multi sim version and connection issues have all but vanished as it will connect to the strongest available signal, (interestingly its almost always on 02 which is good info for those looking for a reliable mobile phone network) unlike my old terminal which only used vodaphone and was prety unreliable. SO for anyone going for one of these for the first time, look out for a multi sim terminal option.
Re: d/w stuck on prog.
you do need to hold down the pause button for about 15 secs to rest on this one, seems an age.
Re: Smeg Dishwasher D612C NTC
reckon you have read that wrong, probably one of these, NTC may all be the same but a rare failure.
DD612S
DD612S7
DD612SCA
DD612SCA7
DD612WC
DFD6121W
DWD612CSS
DWD612SSRe: Online Warranty Registration
just done a on line registration. Can you make the contact number fields optional instead of required as we dont always have, or people are unwilling to disclose, a home, mobile and work phone. I have had to enter zeros in several fields in order to submit the form. No email address for this one either, have to send their details old skool style.
Re:
Lawrence wrote:Thats a servis !
I know!
tried to find out how much she paid for it but conveniently she has forgotten.Re: Butler (smeg) dishwasher BDW7045 uphose required
if it has the off centre lower spray arm position, then I would suggest:
758972416 for the plastic tube
758972415 for the hose at the bottomIf fact, it looks like all the tubular heater models use this combo. Knowing smeg though there will be some different versions around so dont hold me to it!
Re: Ikea (Whirlpool) DWF417 slimline D/W
could be either a Bosch or a smeg! need service number to id. Odds on its a Smeg given the symptoms. Start with the dispenser coil-end with the PCB or anything else in between.
Re: Football season 2011/2012
washdoctor wrote:Haha! Being a gooner, I actually laughed at that! 🙂
We’re in Transition… Just chill out and wait 🙂
Ade
tap…tap…tap…
