Forum Replies Created
-
Posts
-
Re: CDA CI993 integrated washer/drier tripping rcd
from your post it seems you have not meggered the element also why not disconnect dryer element for a few days and see if it trip then
on the neg side i think this machine is obsolete so very few parts are available
Dave
its also worth noting the following
an RCD trip measures earth leakage from a number of circuits and it the addition of the leakage that trips the unit if it goes above 30mA. so if your machine has a 20mA leakage and another appliance has 10mA then nothing will trip unless they are both on
Re: beko wma520
sound a lot like a board power supply problem
check main pcb if power supply uses capacitor change it and see what happens. if its switch mode then its not that
see
trade-technical/simple-pcb-repair-tips-t51155.htmlfor more info
Dave
Re: Dishwasher Diplomat ADP8502 PULSATING LIGHTS
thats a bit steep
have you searched for an engineer on this site?
if you were near me and it was the power supply problem we would do the whole job under £60
Dave
Re: Hotpoint parts service.
next time get the customer to order part herself
of course this also means the customer has to pay again if part goes under warrenty as you have not supplied the part
Dave
Re: Dishwasher Diplomat ADP8502 PULSATING LIGHTS
sound to me like the power supply capacitor on the pcb has gone
you need to find an engineer who will change it to see if it cures itDave
Re: Whirlpool dw- ADP2966WHM door dropping down
fairly straight forward
fit 2 door brake 5031682991527
and 1 or 2 levaer brake 5031682991312you will need a peice if wire to stretch springs back into position
Dave
Re: Brandt range KWE 19X1U trips cooling down
you dont say how you are switching it off but if its a double pole switch its possible for the neutral to break first and in that split second the whole cooker is fed live so if it has a small neutral to earth fault it will trip
try megger it
dave
Re: Samsung spares
connect list the board as a special order but not the holder
you did not give model number or i would have looked up more
Dave
Re: Leaking LG washing machine WM-14445FDS
its one of those suck and see faults
you have to find the line of water and where it had come fromtake the kickstrip off if it has one put machiner up on a few bricks and using a mirror try to find the leak
Dave
Re: Hotpoint Aquarius WDL 540 takes forever to dry?
no filter for the dryer is it getting hot properly?
Re: Neff U1721 Fan element keeps blowing
you said you replaced the element did not say where you got the spares from
have had a lot of problems with non genuine spares being poor quality and a short life span
yours is the semi circle element had a non gen failed while i watched it never fitted non gen sincegen element number 464643
hope it helps
Dave
Re: Hotpoint WDL520P
not seen thisc machine yet but
does it look like its overheating ?ie blocked with fluff or board relay closed circuit
Dave
Re: Whirlpool HDWM100 and HDW1011WD ? Child lock
go to whirlpool site and download user manual
you will need long nc code from machine
Dave
Re: Help please AEG Lavatherm 56840L >Expensive/failed early
from what i beleive the level of proof needed is not as great if the appliance is under 2 years old
from the legal point of veiw most things legal are based on what the reasonable man/woman would expect and in this case you would expect the applaince to last longer than this
you could approach AEG and ask them how long they design their appliance to last under average condtions
Dave
