Forum Replies Created
-
AuthorPosts
-
electrofix
Moderatorwhat price did they quote ?
Dave
electrofix
Moderatori assume they mean the dryer board
might be part no 132 78 73-00 / 4
listed as £86 retail
have you check wiring and removed and replaced connectors ?
dont forget with a communication problem it can be either board or both
Dave
electrofix
Moderatoras far as i can see hinges no longer available both main and small oven
should be part nos X1260000096 or 7002461 for main oven
small oven is X1260000239 or 7006943
you could message the site shop but cant see stock anywhere
Dave
December 29, 2022 at 7:50 pm in reply to: Panasonic NA 140VX3 washing machine error code H51 #485051electrofix
Moderatorwith the machine unplugged the drum should turn by hand
if it does not you need to find out why
could be something jamming it thats got stuck between drums
if it has a belt, remove belt to see if its motor or drum jammed
Dave
electrofix
Moderatorsorted
Dave
electrofix
Moderatorok i see
the hinges are in the locked postion. they have to be unlocked to get them out
put the screws back
grab hinges frimly with pliers and pull to allow you to release the lock
then care fully let the hinge go to the closed postion till you can let go
undo screws again and you should be able to get the hinge outDave
electrofix
Moderatorhave sent you the service info
Dave
electrofix
Moderatormadocks are ok
the pause your account if you dont use for a while but thats in. min £20 order. bit of a pain as they dont have a way to let you over pay for something. was ordering once and it was £19.99 and they have no way to let me over pay by 1p
Dave
electrofix
Moderatorthink its just a clip and hinge slides out
cant see pic probably because they are too big
host them elsewhere and post public link
Dave
electrofix
ModeratorDecember 28, 2022 at 8:51 pm in reply to: AEG FAVORIT 50750 VI dishwasher detergent dispenser open at ‘power on’. #485029electrofix
Moderatorsounds like the Triac on the board that cotrols the dispenser is probably faulty
Dave
electrofix
Moderatorthey can be fun to fit cant they lol
saw a note somewhere that hoover got rid of the screw clamp because of damage to the drum front by being over tightened
Dave
electrofix
Moderatorbear in mind Daewoo have gone and you cant get many parts anymore
have you tried defrosting it in case flap is frozen ?
Dave
electrofix
Moderatormake sure there are no blockages in or to the top are
as for slackness its no a problem as water pressure makes it more stable
wash pump could also be blocked leading to less water
Dave
electrofix
Moderatoruhave you gone into service mode and looked for error codes ?
have you checked water solenoid. Often these machines do a water check before starting dryer properly
Dave
-
AuthorPosts
