Forum Replies Created
-
Posts
-
forget what it looks like apart from mounting electrical connections and hose connections
that pump is a much better construction and more electrically robust
Daveair needs to get in and out of the fridge. with the door open you may feel air getting in but if the return air duct is blocked it wont cool down
Davethere are 2 motors listed for this model depending on variant
is pic below your motor
if yes its obsolete and you have to replace about 7 or 8 parts inc new heater assy
Dave
well it does not seem to have any major problems
double check your connections to the motor card you removed and fixed
double check the brushes. seems odd it worked for 2 loads then nothing. was thinking a brush was not making contact all the way round and sticking in the holder
Dave
can go with the repairing theme we as engineers will always agree with but comparing the oven with the cars no
cant see the oven lasting over 50 years at least not modern designs
Dave
Don is our retail guru will ask him
[USER=”125″]don[/USER]
any veiws on thisas for the fault what do you mean it worked till you attached it ?
Dave
yes found a site that seems to say they will fit but cant confirm
[USER=”2″]kwatt[/USER]
K can you confirm
https://shop.ukwhitegoods.co.uk/1260000095-oven-door-hingewill fit this oven and the availabilty status
Davethere are 2 so you will need the commercial code as well
Dave
if you can solder and check electronic components sourcing a triac should be no problem and a lot cheaper than a board
your pnc number does not come up either can find 911 234 546 plus 00 and 01 but not 02
did find 911 234 548 02
which is more likely but parts are obsolete
Dave
well if the drum spider has gone Miele want £600 retail for that so i cant see it being cost effective
also on your new machine avoid auto dosing. its one more thing to go wrong and you have to buy special types of detergent
Dave
