[helo_75]

Re: AEG Favorit 4040 Pumps Out Continuously

until more water leaks into the base….

😕

u need to be finding the leak before it oes more damage

yes aeg are posh zanusi machines and tend to be very good

[helo_75]

Re: ZX79/5SI fridge problems

😯 good call mkr

how long has it been where a customer has to tell US how much we should charge them for fitting a part?

i mean, the van, phone, car tax, fuel, insurance, advertising costs, vat,income tax, training, experience , etc cost nothing !!! not to mention the public liability insurance, which we have to have because the customer always seems to find a mark on the lino which ‘wasnt there before the engineer came’

yet its funny how kai managed to fix it, only havin been advised by others that it was the termistor (which , incidentally is NOT that easy to change, and there are other mitigating factors which will affect the working of the appliance)

i mean come on, he started by saying he was gonna buy a pcb, then asked where the screws were… then bangs on after he’d been advised by an expert as to how easy it was!!!!!!!!!!!!!!
honestly that post should be deleted or edited – it will cause offence

sorry – had to have my say, i am, it has to be said,greatly insulted

grrrr

[helo_75]

Re: Belling G707 Gas Cooker – Only half the Grill works

please see thread

http://www.ukwhitegoods.co.uk/modules.p … ic&t=16259

that might help some more

[helo_75]

Re: Belling G707 Gas Cooker – Only half the Grill works

thats a gas issue

unfortunately, members of this forum cannot and will not give out information regarding servicing and/or repair of gas appliances

only a corgi registered engineer are legally allowed to repair and service gas appliances

sorry, but your gonna have to call someone out
i apologise if that sounds abrupt, but the law is there to protect people from the possible consequences of gas escape

hope this helps

[helo_75]

Re: Bosch Tumble Dryer WTL 5500 – just sits there!

if it is a condensor btw, and the dry light comes on , it could just be a sticky float switch.. however the fact it has an interior light suggests itll be one of the bosch models built like a tank, and i wouldnt advise u play with it

proffessional advice should be sought to be honest, but plug out if ur gonna play

hth

helo

[helo_75]

Re: Bosch Tumble Dryer WTL 5500 – just sits there!

i take it its a sensor type condenser dryer?

[helo_75]

Re: Hotpoint TDC 30N Condenser Dryer problem

hope u fitted the right stats
i always fit part number 1701583 on those, its a Little hotter than the red spot ones
neway, yes a fluff build up (normally in the condenser to be fair) would deffo cause that, it would also explain how the one shot thermostat tripped out
typical symptoms are hot clothes, but not drying because theyre not condensing, (it aint gettin rid of the moisture!)

i know u say its clean and people do.. but have u held it upto the light and made sure u can see straight thru it?

other than that theres the duct stat which is located inside the door (on the duct funnily enuff)

much better dryer than those damn ctd00p things theyre making now, well worth a fix

[helo_75]

Re: hotpiont wf320

check the motor

damn merloni machines.. they do that!!

lock the door.. wont start… carbons or duff armature

failing that, pcb n eprom

hope this helps

[helo_75]

Re: Candy CIC60 Clean Filter Light

finally,thank you
maybe i just didnt word my 1st post as well as my second 😳

[helo_75]

Re: Candy CIC60 Clean Filter Light

and i stand by my original comment

although it was deleted, i still say that the thermal fuse goes faulty because the cycling stat is faulty

its just better if you change the whole heater assembly, to be sure the fault is cured!

crimped connections dont always work well if your running a 2kw heater through them

anyway.. its imperative this machine is unplugged in any attempt of repair – the element stays live regardless of anything else.(i know, ve had the shock!)

hope this helps

[helo_75]

Re: Bosch Fridge/Freezer, Fridge 2 warm

please, try not to be so hasty

bosch are probably one of the best fridge freezers on the market.

5yrs seems to be average lifespan to be fair, although bosch tend to last longer

dont be dissapointed with bosch and buy hotpoint/indesit stuff!!!!

if you do, then youll know wot true disapointment is

sounds like a thermistor problem to be fair, well, its either that or the pcb as penguin advised

as always, its dificult to advise exactly over the forum, butin this case, it might well not be an over expensive repair, and proffssional advice would be called for

hope this helps

[helo_75]

Re: Samsung SR-L3928B not cooling and funny noises

looks like yer fan blades fallen off

not an expensive repair, if ur gifted enuff to locate it

[helo_75]

Re: Fridge Thermostat for Scandinova 7054 Fridge/freezer

ooohh dont put a kit 3 on that.. they cut in too early

only a genuine vestfrost one will do!!!

[helo_75]

Re: Getting the belt on the tension pulley – Hpt condenser d

and yet a 13mm socket on an extensions the same thing?

i just use an old belt, wrap it round the new belt and pull it over

easy job when uve done a few

[helo_75]

Re: BOSCH WFL 2260 NOT DOING ANYTHING!!! HELP!! PUMP BROKEN

u sure theres nothing else in there?

if its buzzing, its either something jammed in the impellor, or the pumps damaged

unplug ifyour gonna have a poke around

[Author]

Posts