Forum Replies Created
-
AuthorPosts
-
helo_75
Participantdepends doesnt it
some came with 3 stats ( one shot, cycling and ntc)
some came with 2 ( ntc and one shot)
youve ordered the wrong kit
helo_75
Participantboth
pants
utter pants
at least you can take the front of a hotpoint
you ever fitted a pump to a vhc?
or even a belt?
fridge freezers that freeze up and defrost randomly, thats if they dont iceball in the fridgeeven the dishwasher pcbs are rubbish
i wrote a go 1482 off 2 weeks old cos there was some unidentified object kept getting trapped in the bottle, flooding her out every other wash
sign of the times maybe
helo_75
Participantu got mail
October 19, 2009 at 8:38 pm in reply to: Hotpoint CTD40 Condenser Dryer – Tripping my electricity!!! #299928helo_75
Participantthe heaters wet
take off the rear banjo shaped panel.. if water comes out, then dry it all out with a hairdryer
the water is normally there because the drain hole to the pump is normally blocked ( the grey box bottom right ) plug out if your looking !
helo_75
Participanttry unblocking one when its blocked….
yes they do, theyre very narrow
S C R A P
helo_75
Participantits a selector, not a timer
it turns either way, its designed to
helo_75
Participantwell, i only fixed 3 today
2 selectors.. 1 pcb
im not anti hoover… but the latest ones, with the selector integrated on the board are utter pants
go on, challenge me
helo_75
Participantive changed hundreds.. and im a comet engineer
maybe theyre all being sold through comet then
helo_75
Participantroflmao!!! so why make the timer so itll go both ways?
easy fix, lost count of how many ive changed
October 18, 2009 at 12:58 pm in reply to: Help with Hotpoint AQXXF 149 – can’t get the filter off !! #299689helo_75
Participanttake the kickstrip off, and pull the green lever, so the door should open
that usually cures it
helo_75
Participantlol, i just leave em, they dont really serve much of a purpose
helo_75
Participanttime you applied for trade access mr gandhi sir!!
your missing out.. join us, we wont bite!
helo_75
Participantif it has one
helo_75
Participantand they break a lot too
helo_75
Participantunplug the machine from the mains supressor, wait 5 mins, then plug it back in
usually cures it
-
AuthorPosts
