robbra

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 1,090 total)
1 2 3 … 10 11 12 … 71 72 73
  • Author
    Posts
  • April 19, 2012 at 5:00 pm in reply to: cordless screwdriver #362553
    robbra
    Participant

    Re: cordless screwdriver

    I bought this earlier this week and was surprised at the price and the torque, much better than my previous 4.8 volt screwdriver plus two batteries and a set of driver bits. I am chuffed, best bit of kit I’ve bought in ages 😆http://www.angliatoolcentre.co.uk/dewalt-dc600ka-3-6v-inline-pivot-screwdriver-2-x-1-2ah-ni-cad-batteries-pid36993.html

    March 23, 2012 at 7:42 am in reply to: fault code guide #371901
    robbra
    Participant

    Re: fault code guide

    Is there a way to get this other than itunes as they want payment details before I start ie. credit card?

    March 23, 2012 at 7:13 am in reply to: daewoo sticking #371853
    robbra
    Participant

    Re: daewoo sticking

    Don’t forget theses have a 2 year guarantee.
    Rob

    March 15, 2012 at 4:03 pm in reply to: Indesit slimline dishwasher #371131
    robbra
    Participant

    Re: Indesit slimline dishwasher

    Arrived safely.
    Thanks Jim.

    March 15, 2012 at 3:46 pm in reply to: Indesit slimline dishwasher #371130
    robbra
    Participant

    Re: Indesit slimline dishwasher

    Thanks Jim
    Manual would be nice
    Rob
    PS. Where’s the situated? 😳

    March 15, 2012 at 2:56 pm in reply to: Indesit slimline dishwasher #371128
    robbra
    Participant

    Re: Indesit slimline dishwasher

    Certainly is Chinese Jim
    The other number on the rating plate is
    612088177
    The heater is not O/C and does heat the water and is clean.
    Rob

    March 8, 2012 at 9:49 am in reply to: qualtex solid plate hotplates #370432
    robbra
    Participant

    Re: qualtex solid plate hotplates

    I only fitted one, very poor quality, rim was uneven and didn’t fit cleanly on the hob. I haven’t ordered any from them since.

    March 1, 2012 at 7:05 pm in reply to: Is it possible to get ‘SWAN’ spares? #357982
    robbra
    Participant

    Re: Is it possible to get ‘SWAN’ spares?

    Ok Bryan, I’ll bear that in mind.
    Rob

    March 1, 2012 at 5:08 pm in reply to: Bosch WFO2865UK/01 #370120
    robbra
    Participant

    Re: Bosch WFO2865UK/01

    Thanks lads,
    No problem with the door lock but my thoughts were the board so looks like a replacement machine will be on it’s way shortly.
    Rob

    March 1, 2012 at 4:24 pm in reply to: Is it possible to get ‘SWAN’ spares? #357980
    robbra
    Participant

    Re: Is it possible to get ‘SWAN’ spares?

    Just had to write off a six month old Vestel Swan for a door seal. NESN/Littlewoods can’t get one and nobody else seems to have one. What gets me is after the 12 month guarantee, if the haven’t taken an extended warranty, and it goes wrong it’s automatically BER. Perhaps an opportunity for UKW bearing in mind their previous dealings with Vestel.
    Rob

    February 16, 2012 at 7:19 am in reply to: New Bosch Appliances #369037
    robbra
    Participant

    Re: New Bosch Appliances

    I get all mine from Swift now. Free delivery twice a week, great drivers and prices pretty good. A good range of brands too.
    Rob
    Based in Stoke.
    unless you already use them 😛

    February 15, 2012 at 7:27 am in reply to: Tricity Bendix BIW105W…pnc 914213009 01 #368885
    robbra
    Participant

    Re: Tricity Bendix BIW105W…pnc 914213009 01

    Yes Mike, I did tell her that it was in a damp corner and the motor had a film of damp on it.
    I’m going back later armed with a hairdryer.
    Forgot to mention it before. 😳
    Will report back.

    February 14, 2012 at 6:32 pm in reply to: Tricity Bendix BIW105W…pnc 914213009 01 #368883
    robbra
    Participant

    Re: Tricity Bendix BIW105W…pnc 914213009 01

    Spot on Geoff,
    Wonder why it’s not on TDS under that machine. Saved it now so will be handy in the future.
    Many Thanks,
    Rob

    February 9, 2012 at 7:41 am in reply to: Hotpoint RF64 ser. 72101918 #368331
    robbra
    Participant

    Re: Hotpoint RF64 ser. 72101918

    Thanks Ian,
    unfortunately out of stock with no ETA.
    Rob

    February 7, 2012 at 7:28 am in reply to: Hotpoint RF64 ser. 72101918 #368329
    robbra
    Participant

    Re: Hotpoint RF64 ser. 72101918

    Hi Ian,
    Embraco 49HLP 167×55 5.2 LRA
    Hope that’s enough.
    Thanks
    Rob

  • Author
    Posts
Viewing 15 posts - 151 through 165 (of 1,090 total)
1 2 3 … 10 11 12 … 71 72 73