Forum Replies Created
-
Posts
-
Re: Servis WD900
Hi,
Really need a proper model no. and serial no. There was a Eurotech WD90 years ago by Servis but they all start M….. now. I would suspect the module depending on the model and timers rarely go.
Let us know the details.
RobRe: Servis Tumble Dryer M2002S
Hi,
This small board takes the whole load of the machine and do fail often as you have found out but I’ve never had three on one dryer. Is the dryer venting properly or in a damp place as I have found condensation can be a problem inside the cabinet and could cause failure.
RobRe: New Integral Dishwasher Recommendation
Hi,
DAD..01452504084 are doing a Gorenja GV16520, made by Bosch with a 2 yr gtee for around £260…just had one..very good value
RobRe: My fridge is defying logic
The capilliary tube should go in around 30″. Some of these the back wall of the fridge can come away from the insulation, just press it, also the tube the capilliary goes into can be loose inside the back wall and not register the temp correctly. Had a few of these….BER!
RobRe: Beko WMA1512 No start.
Hi,
Had many timers fail under guarantee, either nothing happens or a wash takes 5hrs+ or just never finishes. Having said that the boards go too but I would try the timer if the grinding sound is coming fom it.
Rob
Sometimes these are a bit of a lotteryRe: servis w/m boiling?
Hi Paul,
Just check that the customer is putting the selector back to stop at the end of each wash even if selecting the same programme to clear the memory. These machines have a habit of remembering previous progs or even parts like spin and only doing that.
She may have done a boil and not cleared the memory.
RobRe: Hotpoint…WT965A..ser.no. 606140041
Hi Hotdog,
I removed all the connections and refitted them but to no avail.
I wondered if there could be anything else.
Thanks,
RobRe: Knocking Bosch
Hi,
Had this on a Maxx I supplied earlier this year. I too thought it was the suspa and told customer to contact Bosch. Their engineer called and said they had probs with out of aligned cabinet, he changed cabinet and all was well.
Not heard of it since but thats what their engineer said.
RobRe: hitatci w/d mod. fwd135w ser no. 004621
Richard,
Trouble is that prog 5 is fast spin and prog 4 is slow so she may have to do a spin but on these it involves a rinse and spin as no spin only prog.
Rob
Ps would only use the real Servis element on this as the element on these is resting almost on the plastic tub whereas the hotpoint has the metal plate is under the element and I have seen a melted tub with the hotpoint one. The Servis one has two cut outs on it just for this reason. I have one if you need it.Re: Hotpoint BS63E Oven
Hi Goose,
Had “E” several times and it has always been an overheat situation after grilling and when allowed to cool works ok. Shouldn’t happen but does.
HTH
Rob
