Forum Replies Created
-
Posts
-
Re: AEG Lavatherm Condenser Dryer:
Hi.
First thing to check is that the heat exchange is clear. Secondly, the front felt bearing gets worn & over time lint gets trapped between the felt & drum cylinder. This causes the drum to ever so slightly slow during rotation, thus causing the fan to also slow which restricts air flow across the heater which causes the thermal fuses which are part of the heater to go open circuit.
One way to tell if this may be the case is if on the month old element there is a sign that the silver coating of the heater has bubbled or peeled away.
Front bearing part number is: 899647 40 80-55 / 4
Re: Zanussi ZWF14280S
Hi.
Enter diagnostic to find last recorded fault code may give you some clues.
Re: AEG 44070vi anti flood then drain alarm
Hi.
Two beeps signifies it is not draining in the alloted time. The heater is wired through the pressure switch. If it is actually draining ok then you may have a blocked air chamber or possibly the contacts of the pressure switch are stuck in the full position.
Re: Zanussi ZDT6244 cold water but element seems ok?
Hi.
Sounds from the info that the PCB has failed.
Re: AEG Competence D8100-1M keeps turning off
Hi.
I obviously cannot advise you to do this as doing so alters the manufacturers spec’s & may compromise your safety.
For me, it’s switch replacement or nothing.
Sorry.
Re: Zanussi ZWF 12070
Hi.
The start/pause led will flash red & then green. For example, no drain is E21. The led will flash red twice to represent 2 & green once to represent 1.
Re: AEG Competence D8100-1M keeps turning off
Hi.
Power switch is a known issue on these causing random cutting out of either oven. The switch is only available with the complete control panel & that I believe is well over a ton the last time I checked.
Re: ZDT6041 Zanussi dishwasher
Hi.
If it is opened during a drain phase, I think it will continue but draining only. If she can open the door & it still washes then yes the lock will need replacing.
