Forum Replies Created
-
Posts
-
Re: NEFF
Gaie wrote:please tell me where I can get a manual and if not, have you found out what the dials mean?
Do try this link for the info you need:-
http://www.bshappliancecare.com/neff/
Martin
Re: WFF 2001 Bosch Wassher
Yes a new Solenoid Valve (Part No: 265772) should solve the problem :tup:
Martin
Re: heat pump tumble dryer
mazda609 wrote:What PDF file? I can’t find the size information in the PDF file.
Indeed not, no measurements are given.
Martin wrote:and presumably contained within a 600wide 600deep by 820 high cabinet
It was only my presumption as such a device would have to be contained within these parameters to enter the UK domestic market.
…which I believe would be an impossiblity.
Martin
Re: Who owns what and is it any good?
Dr Madvibe wrote:Is a stainless stell drum a common or rare thing?
Its usually associated with the ‘better’ models 😉
Oh! and the White Knight thing is not quite correct, CROSSLEE are the manufacturers of both White Knight and the budget range Bosch machines. And they are pretty good overall whatever as long as it has that all important S/Steel drum mind you….. ❓
Martin
Stargazor wrote:Once again your advice is much appreciated.
My pleasure, and you know where to come for advice in future 😀
Martin
Re: Hotpoint Condenser TDC30P
Bryan wrote:Does drum need to come out for this?
Yes indeed to enjoy full access to doing a proper job of cleaning the float chamber out AND servicing the machine. As we would do in the trade for you if you where to call one of us out 😀
Martin
Re: funkyboogy
Alistair Milne is his name by the way, no idea whereabouts in Bonny Scotland he resides though 🙁
Martin
Re: Creda T632CW Thermostat
The good news is all the door parts are available (all sold individually) so what part of the door is broken and is the door hinge OK?
Martin
Re: Zannussi Aquacyle 1400 fx1465 5 beep/flash end light fau
Lexotron,
You need to run that by us again by counting the flashes you get from:-
A) = The “End” LED?
B) = The “Start/Pause” LED?Also please let us have the machines Product Numbers (By the Door seaL)
Martin
Re: changed thermostats
iadom wrote: The dryer neon should be off whenever the motor reverses, it should not be on all the time.
I wonder if net 0159 has made this observation?
Martin
Re: Sparking after replacing brushes – Hoover WDM120
JonC wrote:My washing machine is running quite loud now in a whining way, could this be because of not dressing?
If it only sparks during the fastest spin, then read my earlier posting. If it sparks at most speeds then the armature is at fault and a new motor required. Also if you look closely at the commutator segments and one or two are blacked or marked more than the others, your motor is duff 🙁
Martin
Re: Hotpoint washer/dryer, no drum action or pump on dry,???
MANDELLS wrote:anyway it came in with the condensor box shook off, got that sorted.
The clues as to what could be wrong are often in the original fault….? I would check your wiring to and from the heater box if I were you 😉
Martin
Re: Sparking after replacing brushes – Hoover WDM120
JonC wrote:So, is there a “bedding in” period that this is acceptable for,
Jon,
Yes indeed, best not to allow them to do a fast spin first off. Better to let them do a long wash cycle instead 😉
Martin
Re: Servis M4803 not washing. PLEASE HELP
David,
Not the timer at all I suspect, more likely the heating element. Does it get stuck at 2 points during the complete wash cycle?…Does it heat up the water at all I wonder??
Martin
Re: Bosch dishwasher ‘Hydro sensors’ and 1 fault code
Ray9500 wrote:the heater boxes have been spotless.
anywayNot sure how you would know that Ray if you haven’t changed it 😕
Ray9500 wrote:…don’t like changing heater units on these 😀
As the fault is associated in this area it really would be your favourite option though, in spite of the fact its a fag taking the tank off and stuff 🙁
Martin
