Forum Replies Created
-
AuthorPosts
-
Martin
ParticipantRe: Hotpoint RL64 Iced Diamond Larder Fridge – not cold
NeilD wrote:Is there anyone that can help? I am in the Solihull, West Midlands area.
Most likely a faulty Thermostat, go into ‘Directories’ (on this site)and type in your postcode search to locate a local fridge engineer 😉
Martin
Martin
ParticipantRe: Site News & Updates
The site is going crazy at the moment, so many are in here right now. Time to ‘hold fast’ your stations guys and hang on tight!
8) 8) ‘High Fives’ time…..We’re SMOKIN’ 8) 8)
Martin
Martin
ParticipantRe: Hotpoint 9555P – fault code EE – help !!
I concur Dave’s reply. My advice = Sorry but ‘bin it’ time to call it a day and buy a new Bosch OK 😉
Martin
Martin
ParticipantRe: glass door for Sheffield 1100 range cooker
Futureboy,
I assume you have asked ‘Corning Glass’ who make most oven and ceramic hob glass (and sub contract under license to others) throughout the world (and the UK) also of course Pilkinton Glass 😉
Martin
Martin
ParticipantRe: Diplomat gas hob not sparking
Minty wrote: also wanted to say absol. blinding site! once again, thanks
How kind, tnks 🙂
Martin
Martin
ParticipantRe: Diplomat gas hob not sparking
Minty wrote: any thoughts?
Yes Minty, most likely the ‘Sparker Unit’ has failed possibly the push button switch/and or the connections to them both
Minty wrote:if this reqires a spare part is this something i might be able to tacke
No, not recommended 🙁
Minty wrote: or would it req a reg corgi eng?
Yes most definately 🙂
Minty wrote:i suppose an alternative is to buy a handle held spark if the above is going to be expensive?
Best idea of the lot 😉
Martin
Martin
ParticipantRe: Creda 17076 thermistor wiring
Seamy,
A very belated reply I know but I have actually found the 3 tag stat you want for this machine at last! 😆
Part No: 168234 (See Partfinder- Hotpoint WM22P b/4 date code 16) 😉
Martin
Martin
ParticipantRe: Bosch Filter
The pump chamber is 172340 and the screw- in filter/coin trap 151409
Hope that helps 😉
Martin
Martin
ParticipantRe: Ariston Magherita 2000 Fault
Deimos74 wrote:The only other model information on the front of the washer is AB95.
Deimos,
Sorry but no record of that model on Ariston database, is this made for the UK Market ?
The full model and serial number will be on the back panel I’m afraid 😉
Martin
Martin
ParticipantRe: Ariston Margherita AWD12
Anonymous wrote:Can I use my 5 years parts warranty?
That would be a sensible option to pursue as repairs could be costly in parts alone 😉 , but in order to do that you would need to call whoever covers the warranty. And get one of their engineers to look at it. They would just charge ‘Labour only!!!
Martin
Martin
ParticipantRe: Ariston Magherita 2000 Fault
Please supply correct and full Model Number Please!
MartinMartin
ParticipantPenguin45 wrote: Need to get the rock pool and fish organised in advance
Bloody typical of penguins …. always thinking about the next meal eh? 😉
The venue is STAFFORD….mid England….loads of fish (and chips)…no worries OK 😆
Martin
Martin
Participantkwatt wrote:S’ok, me, Dave and Kev make up the first 100! 😆
My calculator says that I buy you each 33.333333333 Pints then!
The brewery should do well here on this but I would dread to see Dave on the Saturday after 😆 😆 😆
Martin
Martin
ParticipantRe: UK Whitegoods Limited
Excellent, logical, businesslike approach and I give it my full backing.Registration within Scotland is also (legally) a good move!
Martin
Martin
ParticipantRe: Indesit WE 12 Washer
Fats,
Just make sure you have cleared all blockages from the pump OK 😆
Then set the dial to the black ‘spot’ (there are several positions with the same)….Press and HOLD the ‘Start’ button for several seconds until the light starts flashing rapidly 😉
Then, try a spin only cycle?….It should pump and spin as normal, hopefully ❓
Let us know otherwise OK?
Martin
-
AuthorPosts
