[senseib]

Re: diplomat / smeg d/w

Sorry ignore last post! – thought it was a Whirlpool in disguise – its not!

[senseib]

Re: diplomat / smeg d/w

Almost certainly the switch diaphragm in the sump.

[senseib]

Re: Zanussi FLE1416W Leak

I have known the inlet valve dribble on Zanussi m/c on spin in the past, especially if its the type where the inlet hose is not directly coupled to the valve and the water is drawn through – Not sure on that model.
Just a thought!
Brian.

[senseib]

Re: whirlpool adg 7540/1

If not the thermister check the switch diaphragm in the sump, this often gets clogged-up. Often just removing rinsing out & refitting does the trick. I find these the two most common faults on Whirlpool dishwashers, with the latter being the most common.
Brian.

[senseib]

Re: whirlpool adg 7540/1

In my experience with whirlpool d/w’s if the fault shows up quickly it is usually the NTC feeler – especially when it flashes continously.

Hope this helps.
Brian

[senseib]

Re: Diplomat D/W ADP8242

Could really do with some of that wisdom regarding the “Smeg build in dishwasher” passing on to my problem as I think it is the same PCB.

If it is a pcb problem, can it be cured? if so how?

Would really like some constructive help please lads!
Brian.

[senseib]

Re: Attractive Blonde

I know how this ends – Bedside alarm goes off!!!
Does for me – anyway!
Brian.

[senseib]

Re: Diplomat 8242 integrated dishwasher.

Has circulating motor seized? – can happen when m/c not in use for sometime!

Brian.

[senseib]

Re: Wet or what?

No most calls in and around Guiseley and Bradford today. Thank heavens for Yorkshires high grounds.
Brian.

[senseib]

Re: indesit DI620 no heat

More than likely pcb. Sometimes on those boards its just a dry joint at the heater connection – should check this first before ordering a new one.

Hope this helps.
Brian

[senseib]

Re: When is Hoover NOT Hoover?

Very wary of the yp when they started asking questions like ” how many people work at the firm” What’s that got to do with placing an advert?

Brian.

[senseib]

Re: hoover no drum turn

i would say timer/module fault on that machine. 😥
Good way to find out though! ring EMW they will send you a recon’d replacement unit, if wrong it will only cost you £5.00 or so as this is the cost of returning it to them, even with dirty finger marks on it! 😆

brian.

[senseib]

Re: It never rains!

Live and work near the highest airport in Britain, – not much chance of that round here!

[senseib]

Re: Servis W/m

I tend to use EMW for recon’d modules they will send you a replacement module, as opposed to QER who tend to repair the original (not always successfully).

[senseib]

Re: Hotpoint BFI620 intergrated dishwasher heater fault?

Often on hotpoint d/w pcb’s there is a dry joint at the heater connection.
Just resolder and this cures the problem. hope this helps.
brian.

[Author]

Posts