Forum Replies Created
-
Posts
-
Re: Zanussi ZWD 1471W Error Code E36
Hello Graham,
Just back from a cycle run up the glen (braw nicht oot) E36 error quote, “sensing circuit on anti-boiling pressure switch 1 is defective.
Main board defective.Machine responds with stopping cycle with door locked, hope this helps.
silverbroom
Re: Customer Database
Had an e-mail from Geoff at BLI Service with a sample of a service call management system.
Said a demo disc would be ready in about three or four weeks, Sure this is on UKW somewhere.
silverbroomRe: very shocking
The Baumatic element to me from Connect is £60:21 alternative at £20:93.
silverbroomRe: help
I am sure someone will be able to help but more info is required, what sort of problem is your machine giving you?.
The more info you give the more likely someone can come back with advice.
silverbroomRe: Changing Door Swing on Zanussi ZDC67550W Dryer?
Hello, this is not a job that you should consider as a DIY project.
In the Zanussi engineers manual is a 30 stage procedure ending with a safety test using a dynamometer in relation to the door being able to be opened from the inside should a child crawl inside.
Sorry but your best and safest option is to call an engineer.
silverbroomRe: New way to replace Bosch brushes.
That’s the way I do them Steve, if the room layout lends it’s self to tilt the machine to the side then this is my prefered method for motor removal along with a ratchet spanner.
silverbroom.
Re: Cancellation of Contracts Made in a Consumer’s Home
What you have said Martin sounds correct to me, I have just been accepted into a local trading standards scheme regulating tradesman and had a visit from one of those trading standards chappies to complete the paper work.
The bugbear is that once you have completed the job the customer can still cancel (for whatever reason) within the seven days.
silverbroom
Re: Door seal lip repair?
A wee while ago I posted about Bosch door seals having a nick out of them around the six to eight o’clock position.
BSH man came back saying this has been happening since Bosch introduced the big doors. Have fitted quite a few, good work to.
silverbroom
Re: Hoover HFA290GB
Thanks Simon46 and subs for your input, fitted new pcb, now working a treat.
silverbroomRe: Hotpoint TDC30 -not heating – new stats & element
On your model you have another thermostat located in front of the drum. If you open door and look up at the twelve o,clock position you will see the head of the thermo and two screws, other possibility is the timer.
Remember to UNPLUG machine to make safe.
silverbroomRe: Hoover HFA290GB
Thanks for that Simon46, going on Saturday, will let you know eventual outcome.
silverbroom
Re: Zanussi ZT 695 flashing lights
This is classed as an L1 error.
Eight different probs, but suspect anti flooding device as first port of call.
First unplug machine to make safe.
As in most situations dishwasher will be slotted in below worktop, pull out and put a towel at the rear of appliance then tip back 45{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, water may come out (reason for towel) if so this confirms overflow to sump tray.
Stop using tablets and go back to powder.
If this does not cure problem click on Find an engineer as you have done as much as you can without further expert advice.
silverbroom
