Forum Replies Created
-
Posts
-
kwatt wrote:I’m curious. 馃榾
Now some of you have had these for a bit are you finding them useful?
K.
I think thats a yes then ken,
bring a large stack to Sibson.
Re: AEG 44080im
Assuming it is described as “semi intergrated” (ie the control panel is visible about the wooden door panel) then yes your panel will fit…..but its not always so easy. The old mounting brackets will need to be removed from your old door panel and the new ones fitted. I dont know the model you are buying, but they usually come with instructions (IKEA syle so not always easy) and a template to mark where the new brackets should be fitted. In some cases, a small strip needs to be shaved off the kick board under your dishwashers front in order to clear the door.
Re: MFI
yep, email recieved, 拢43 quid a call and TB anouncing officially that he is going:
Dear Colleague
I am pleased to confirm that from the 9th of September 2007, repair rates for all new calls sent to you will increase by 拢2.00 per completed call.
The next review of the rates will be in September 2008 and, where applicable, increases will be based on the RPI rate (announced by the National Statistics Office in September) for the preceding 12 month period for implementation in January.
On a separate note, it is great to see that everyone鈥檚 efforts (since the transition of the business last year) are beginning to pay off. Internal reorganization, cost control and re-engineering of the business has led to a stabilization in our decline in sales and we are now well on the way to returning the business to profitability.
A direct consequence of that is an investment in the Diplomat brand that will lead to a launch of an exciting new product range towards the end of the year, ready for the Winter Sale. Coupled with that, has been a new product launch via the Howdens Joinery route.
Howdens are introducing a number of new appliances including (non exhaustive):
路 2 new washing machines
路 1 washer dryer
路 A new tumble dryer
路 A selection of Domino hobs and
路 Various other cooking appliances
Comprehensive product details will be included on our IdenTIFFier disk that will be released shortly.
Finally, having spent the last 10 years with MFI, I have decided that the time is right to explore new opportunities and I will be leaving at the end of the month.
I would like to thank you for playing your part in the working relationships we have formed together over the years. I know my successor will continue that work.
I would like to thank you for your continued support to MFI and our customers and wish you the very best for the future.
Yours sincerely
Tony Brown
Field Operations Manager
Re: smeg 16aaa (1600 spin ) bearing failures
no but heard some noisy ones while attending other appliances and kept my mouth shut 馃槈
Re: Is it a Bosch?
Whats more, if you go on a Hotpoint badged Bosch dishwasher, there is usually also a Bosch model number on the rating plate right alongside the Hotpoint one. These also work on quickfinder and the parts are a whole lot cheaper than from Hotpoint.
Re: diplomat d/w
You can remove the pump easily with the machine is situ. E7 is an unusual error on that model, while its a common failure on the 5 button version.
Re: Smeg STX1.1 dishwasher PC fault code?
Its not an error code, i guess its PO with a duff display segment ? I assume the door lock hasnt rolled over into the door closed position? Have you tried swtiching on power and hitting the programme button 4 times before the display lights up, sometimes that re sets the programme. Only other thought is the usual dispenser coil problem which efects these machines in differing ways, slave on any old valve coil if only to eliminate it. Other than that, assuming the tray underneath is not full of water, it will probably bee an new programme card.
Re: How much.
done a update lately? With the old washvac system, if you missed a few updates the update file when you finally do update was too large and it would take several conscutive updates for everything to work properly.
Re: Barclays Premier League 2007 – 2008 / Champions League
Penguin45 wrote:Ho, hum – Derby-Tottenham – 3rd game of the season – a 6 pointer for both sides based on our results so far……… 馃檨
Chris.
4 nil! 9th in table! (provisionally ahead of the arse) whats to complain about. Were we not laughing at the Arse at the bottom (NPI) of the league this time last year?
Mido scoring on his debut at the Borough was tough though, should have hung on to him IMO.Re: creda tcr2/keeps stopping
harley wrote:GUYS,TO CUT A LONG STORY SHORT IT TURNS OUT I HAVE A THREE MONTH OLD TCR2 IN THE GARAGE WHICH I FORGOT I HAD, CHEERS, JOHN
…as you do!Think the relay is on the board behind the console, isnt it? not saying that is your problem though.
Re: Hose clip pliers
what “supplied clip” is that then? I never seem to get any. These pliers look like Clic type. Works on quite a few but not on the re usuable types. IME its not the tool that is hard to find (I have 3 different ones) it sourcing the clips themselves that is the problem.
Re: UKW Subs Funding – the future?
kwatt wrote:Replying to my own post, I know, bad form but all the same just so you all know the current financial position…
Currently the subs fund consists of as a live balance this evening as copied directly from the online bankiing:
RBS wrote:
UK WHITEGDS LTD SUBS ——– 00155227 —– 83-27-31 ——— 拢9,283.27We are still due some subscriptions, but not many now.
The subs ain’t exactly what you’d call skint, not rich either mind, but we’ve done not too bad a job of managing and incrementally increasing the funds available over the past while. 馃槈
Which actually leads me to another point and something I have to ask you all to think about before Sibson.
Can I hive this off to it’s own independent account at some stage please? The primary reason being that I would advise setting up a linked account to a higher interest one so that, the funds that are sat there, accrue a bit more in the way of interest.
The only trouble is that it means we’d have to change the account numbers again. 馃槙
K.
Why can you not do what most of us probably do already…hive off a substatial amount to the high interest account and leave that account open for future subs and then transfer it over?
Re: Diplomat APL3301/3 fan oven element
No its a Brandt made oven and only 2000w.
76×3719 is gen part number
