[leavemetogetonwithit]

Re: Belling 627w

Sorta sounds like it might be stuck in auto mode. But I’d think you’d have figured that. If it was defo wkg b4 you switched off y shd thermal fuse blow?
Mike.

[leavemetogetonwithit]

Re: Zanussi FJS1225W P/NO 914512720/00Hi

gandh1 wrote:

leavemetogetonwithit wrote:
unplugging mtr, htr, as quick tests

are you having problems with your vowels again mike ??? 😛 😀
😆 Not really. Just trying to spend less time on here; trying to keep my addiction under control. 😆
Mike.

[leavemetogetonwithit]

Re: Miele D/W inlet hose/valve – outrageous price

Looks like it’s just basically an aquastop. Could probably make a Bosch one fit?
Mike.

[leavemetogetonwithit]

Re: Hotpoint Sealed Drum Replacement

I got a complete sealed tub straight from Hotpoint 08448 116 999 with a good trade discount without having to prove I was trade. (Cheaper than the wholesaler IIRC.) Courier delivered direct to my customer next day.
Mike.

[leavemetogetonwithit]

Re: A Service Engineers Business Dashboard

Back orders take so long or never come at all that I’ve given up with ever ordering anything that’s out of stock.
If one of my three wholesalers don’t have it, I look at the manufacturer’s own supply line, e-bay, Google the part number, whatever it takes. Sometimes ends up cheaper from a retail site anyway.

Dashboard idea sounds OK (in a sailor’s song…) I reckon if you’re organised enough to sort that out then you’re probably organised enough anyway.
Mike.

[leavemetogetonwithit]

Re: Neff B1430NOGB/02 sgl f/oven w. grill. Tripping problem.

New element sorted it. Thanks again.
Mike.

[leavemetogetonwithit]

Re: zanussi zwx1506w washing machine

Watch out for damp and insulation below 40 megs on htr or mtr.
Mike.

[leavemetogetonwithit]

Re: Indesit WIL 143s

Get a board from EMW. Send it back if no cure.
Mike.

[leavemetogetonwithit]

Re: Beko WMA767W spins on wash.

Don’t forget Beko tacho magnets sometimes break.
Mike.

[leavemetogetonwithit]

Re: Indesit WD12X.

It’s nearly always F8 😈 and EMW is the only (95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure) cure if the customer is too poor to afford skip hire.
Mike.

[leavemetogetonwithit]

Re: Zanussi FJS1225W P/NO 914512720/00Hi

Low insulation & / or damp brush holders. Try unplugging mtr, htr, as quick tests.
Mike.

[leavemetogetonwithit]

Re: New Speed Cameras

Something on the box tonight. Hope for the future? If they get that fixed they’ll probably let you go even faster. 🙁
http://www.bbc.co.uk/programmes/b00ylxg8
Mike.

[leavemetogetonwithit]

Re: samsung auto j1453s

bzz67 wrote:i think from memory 4E is prssure sensor fault. usually easily sorted by cutting back the pressure tube near the pressure switch at top of machine, the hose splits causing no water level sensed in alloted time.

hope this helps.
Thanks bzz. That was spot on. Just done one this morning.
Looked as though the weight on top of the drum had rubbed on the hose; there was some of the rubbed away rubber lying on top of the weight. It must have jumped a lot to do that. Surprised there was no other damage.
The error codes in the sticky (and possibly in book, didn’t look) don’t correlate to this model. Or are they inaccurate?
Customer book states:

Error displayed Solution
dE • Close the door.
4E • Make sure the source water faucet is turned on.
• Check the water pressure.
5E • Clean the debris filter.
• Make sure the drainage hose is installed correctly.
UE • Laundry load is unbalanced; loosen any tangled laundry.
• If only one item of clothing needs washing, such as a bathrobe or jeans, thefinal spin result might be unsatisfactory and an “UE” error message will be
shown in the display window.
LE • Check the end of the drain hose is (not) too low. (Make sure the holder of drain hose in the back is intact)
• Check the end of the drain hose is (not) submerged in water
Have added above to codes thread.
Mike.

[leavemetogetonwithit]

Re: **KNOWN ERROR CODES**

Samsung J1453S.
From user manual:
dE • Close the door.
4E • Make sure the source water faucet is turned on.
Check the water pressure. (Or over filling, holed p/sw hose).
5E • Clean the debris filter.
Make sure the drainage hose is installed correctly.
UE • Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans, the
final spin result might be unsatisfactory and an “UE” error message will be
shown in the display window.
LE • Check the end of the drain hose is (not) too low. (Make sure the holder of drain
hose in the back is intact)
Check the end of the drain hose is (not) submerged in water.
Mike.
(If this has already been posted here, mod plse del.)

[leavemetogetonwithit]

Re: Zanussi zwf 1421w 914521003/00 wont play nice

Anything under 40 Megohms, and the programme will be interrupted.
Mike.

[Author]

Posts