Forum Replies Created
-
AuthorPosts
-
Martin
ParticipantRe: hoover vhc392t fitting heater
Wrong forum should be trade tech. But anyway access from front on this heap of junk.
Martin
ParticipantRe: Washing machine skips hot wash: EWD12141
You might find this of interest……
Martin
ParticipantRe: Washing machine skips hot wash: EWD12141
…….but it won’t stop on B
Martin
ParticipantRe: Apposite picture?
Something like this you mean….?
Martin
ParticipantRe: zwd12270w1 not condensing
If there is an earth leak on the dryer element then odd faults like this are likely to happen.
Martin
ParticipantRe: zwd12270w1 not condensing
Fluff blocking the lower part of the condenser?
September 24, 2014 at 3:34 pm in reply to: hotpoint df70s dishwasher starting before turned on #419581Martin
ParticipantRe: hotpoint df70s dishwasher starting before turned on
DF70S ?
Martin
ParticipantRe: Washing machine skips hot wash: EWD12141
2 possibles : the indicator dial broken or the holding solenoid in the timer is stuffed?
Martin
ParticipantRe: Hotpoint dryer belt fitting tool
The latter…
Martin
ParticipantRe: Bosch WTE84307GB/08
When the display goes blank is the Start/Stop LED still illuminated?
Martin
ParticipantRe: zwf16070
Lots of ideas Dop….
……but first, who changed the “top” and why?
Have you tested it yourself?
Unless it is overfilled when the drawer is shut the chances of it happening are calculated (by BetFred.comgivemeyourmoney) as 7 to 2 on!
Water pressure, high or low?Martin
ParticipantRe: Cheaper to buy new
Labelling my stock boxes and racks. Filing drawer folders. Very useful tool and would be lost without it. Better than scribbling post it notes everywhere. Customers and engineers alike love it, oh yes they do! 😉
Little tip when you’ve got one : keep the margin setting small (saves yards of tape)
Martin
ParticipantBosch SMV50E 00GB/20
00647251 is the one you need. It is fully programmed too. 😀
The number you mentioned was a digit missing. And you can’t miss your digits out – not in this game :clown:
September 24, 2014 at 11:12 am in reply to: Indesit Moon Model Sixl 145 UK won’t extract water #419526Martin
ParticipantRe: Indesit Moon Model Sixl 145 UK won’t extract water
Sink coupling if it shares the sink drain?
Martin
ParticipantRe: Hotpoint WMPF843 problem
Not familiar with Hotpoint but isn’t this a case of resetting the pressure switch?
i.e : remove pressure switch hose to reset switch to empty, reconnect hose then fill drum with 1 litre of water. Then switch to drain and life returns to normal again?
-
AuthorPosts
