[philfish]

Re: POND PUMP

LEAVE US FISH ALONE!!!!! all this talk of eating us, shocking us, shooting us,feeding us,giving us food with hooks in so you can drag us out by our mouths, putting us in small confided places and blowing bubbles up our ar{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}es and seeing which pump is best to do this and knowing all the time we can not escape! All in the name of fun you lot are sick people!!!!!!!!!!!!
And don’t even get me started on them “hitmen”penguins they’re the devil’s handy work.
Don’t know how you sleep at night with thought of what you do to us poor little fish’s.
Humans have rights why can’t us fish? with you lot about we are fast becoming a minority but strangley enough i don’t see many of you picking on my cousin JAWS! go pick on a fish your own size

PHIL THE FISH! AND PROUD OF IT!!

(Chairman of the fish preservation society)

[philfish]

Re: miele w149 inner lid

silly question is the inner drum in the correct position? Try switching appliance off at the wall rotating the drum all the way round so its opening is at the top again and rebooting it! Has long as the the door catch, door interlock are all ok and its opening off the door release button then it could be one of a number of things pcb, sensor etc etc and these are really a pig to work on very well made but very awkward for the first time to take apart and put back together and not only that due to the cost of the parts i would highly recommend you get an engineer to look so your 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} positive what it is.

Phil

[philfish]

Re: Miele W842 Washer. Flashes Rinse

or tacho must recieve signal from tacho within a few seconds otherwise it will flash up rinses light

[philfish]

Re: Belling 6060 slow reaching temp.

fans are weak not getting up to speed or slowing down once they have been on a bit,element down or half the element working.

[philfish]

Re: Miele G646s D/w

Could not be recieving the signal from reed switch on the flowmeter,faulty reed switch sticky flowmeter. not sure of model but flow meter either in the matrix on the side or its in a little black or white box at the front bottom right hand side of the machine if that makes any sense!

hth phil.

[philfish]

Re: I want………..

wards wrote:nothing new there guys,i have had one of these for years,i call it THE WIFE. : 😉 😆 😆 😆

I think if she reads that she would be throwing cans of beer at you lol

[philfish]

Re: Zanussi FL – 1081 washing machine problems

iirc correctly the the drain pump and the valves are on the same circuit so if pump goes down it wont fill so it could still be a valve problem. i would also be looking at the pressure chamber they have a nasty habit of getting blocked or partially blocked causing some strange problems just something to check for.

phil

[philfish]

Re: Pathetic!

I must have led a sheltered life i have never seen an “bearing lock” is it any good and where do you get it from?

cheers phil

[philfish]

Re: Beko WMA510W

It could well be doorlock and pcb without seeing it i cant say 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sorry

[philfish]

Re: Meile G641 dishwasher

Yes it does 😉

[philfish]

Re: Meile G641 dishwasher

think they also have a reed switch on the side of the container
hth
phil

[philfish]

Re: Beko WMA510W

Hi
It could be a number of things door lock,pcb,heater,motor hard to tell with out seeing it or meter readings.
Does water go into machine at all?
Can you select spin does motor turn?
anything light up?
It really is a process of elimination

power off if your attempting anything

phil

[philfish]

Re: hot point wt540 flashing lights

count the flashs it is a fault code will give us a better idea also have you got the serial number usually in the door

[philfish]

Re: Miele W2240 Check Drain light flashing

Drain light usually means machine as not emptied the water out in its desired time if you say the filter etc is clear and the pump is definatly pumping water out there has to be a blockage or some form of restriction somewhere trapped hose blocked sump hose etc etc. also check connection to the u bend on the sink the spout gets blocked up at times

hth phil

[philfish]

Re: Miele T490 tumble dryer

Needs a load in to test properly! does timed drying work ok? check carbons have not worn on top of the drum when they get down to a certain level they can jump off the drum(bounces off a nut which is fixed in the straps) when the drum goes round.

[Author]

Posts